Videos
for Trailer Ramps
Help Articles
for Trailer Ramps
Expert Answers
for Trailer Ramps
The Stallion #288-07503 loading ramps are manufactured in China. For a US made alternative, check out the Gen-Y Hitch Heavy Duty Aluminum ramp set which measure 72 x 14 inches which we offer as part #325-GH-R72. I've linked to a demonstration…
view full answer...Hey Jason, The individual ramps from the Flint Hill Goods Arched Ramp Set #FHG83ZR weigh in at 14.5 lbs so combined you're looking at 29 lbs.
view full answer...Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
view full answer...The longest section of E-Track that we carry is a 5-foot long section, #E19148. To get to 10 feet you would also need a 2 on each side.
view full answer...The longest section of E-track that we offer is the part #E19148 that is 5 feet long. Since the track would need to be securely attached to the trailer it is installed there would be no incentive that we can see for welding the tracks together.…
view full answer...We likely have a toolbox which will work with your Aluma 548 trailer although A-Frame toolboxes are not made specifically to fit certain trailers so you will need to know the amount of room you have to fit the box. I do recommend going with a plastic…
view full answer...You can install the Erickson Horizontal E-Track #E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track…
view full answer...We carry many fenders, though we do not have a list of parts specific to any type of trailer. I have added a link for you to each of our available fenders to take a look at. You will need to know the size of your tires as well as the length of fender…
view full answer...Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…
view full answer...Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…
view full answer...For your Aluma 6810 HBT trailer, I recommend the Erickson Horizontal E-Track - Zinc Coated Steel - 2,000 lbs - 5' Long - Qty 1 #E19148 along with the E-Track Backing Plate - Zinc Plated Steel - 6" Long x 6" Wide #e96RR. This will save…
view full answer...We do have grip tape like #CAM25401 or wider and glowing #LC379600. We also have the 6 x18 inch #NSWS. Because you are using them on your ramp door for your motorcycle, you may want to consider the Erickson Tough Tread Strips - Stick On - 4"…
view full answer...
Filters
