Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leaf springs. Wet bolts and bronze bushings help keep your setup lubricated.

This leaf spring suspension kit prevents shock transfer between axles, increasing traction while braking by as much as 70 percent. Heavy-duty shocks reduce bouncing, chucking and porpoising of your trailer up to 50 percent. Fits 3" axles.

This leaf spring suspension kit prevents shock transfer between axles, increasing traction while braking by as much as 70 percent. Heavy-duty shocks reduce bouncing, chucking and porpoising of your trailer up to 50 percent. Fits 3" axles.

Lift kit raises your trailer frame by 3-1/8". Kit includes spacers and mounting hardware for tandem axle applications. Compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities.

Round trailer axle beam measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes pre-greased idler hubs - with bearings, races, and seals - for 13" to 15" wheels.

Improves suspension, handling and safety. Progressive spring rate. Provides additional support as needed so you always have a smooth, comfortable ride.

Get a smoother towing experience by upgrading to these rubber equalizers that absorb road shock and reduce chucking. Up to 3" of suspension travel helps to compensate for different types of terrain. Fits trailers with double-eye leaf springs.

Extend the life of your trailer's suspension with this heavy-duty hardware kit. 1/2" Thick steel shackle straps will outlast the standard straps on your double-eye leaf springs. Wet bolts and bronze bushings help keep your setup lubricated.

Trailer axle measures 89" from hub-face-to-hub-face and 74" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.

Suspension kit includes equalizers and hardware for attaching leaf springs to the hangers on your tandem-axle trailer's frame. Includes (2) 4" tall equalizers with built-in grease zerks for easy lubrication and heavy-duty shackle straps.

Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 4,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

Leaf-spring mounting kit includes 3-3/4" tall front hangers, 3-3/8" tall center hangers, 5-1/6" tall rear hangers, and necessary hardware. Equalizers are 12" long. Components for mounting axle to springs sold separately.

Trailer axle measures 95" from hub-face-to-hub-face and 80" from spring-center-to-spring-center. Includes electric brake assemblies, hubs, drums, bearings, races, seals, and mounting hardware. Easy Grease spindles for simple lubrication.

The Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle, allowing for maximum ground clearance and a low deck height. Suspension units replace your existing axle and operate independently. Fits any frame width.

Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing.

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.

Mount your square, 2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. Zinc plating resists rust and corrosion - great for boat trailers.

Prevent uneven wear on your RV tires and get a smoother, more stable ride by properly aligning your trailer's axles with this kit. This kit also lets you raise your trailer or RV so you can tow with a tall or lifted truck. No-drill installation.

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

The Axle-Less system provides a smooth, quiet, safe ride and can eliminate the need for an axle. Suspension units replace your existing axle and operate independently. The 4" drop spindle allows for a low deck height. Fits any frame width.

Get a smoother towing experience by upgrading to these rubber equalizers that absorb road shock and reduce chucking. Up to 3" of suspension travel helps to compensate for different types of terrain. Fits trailers with double-eye leaf springs.

Replace your tandem-axle trailer's suspension attachment parts with this hardware kit. Works with Road Armor equalizers. Includes shackles, wet bolts, and hardware.