Hey Andrew, the Fastway e2 system part #FA92-00-0800 would be a great option for a weight distribution system and sway control for your 2022 Forest River Cherokee Alpha that has a 720 lb tongue weight. Have you used WD systems before?
Hey Scott, thanks for reaching out! I don't have the exact height of that bracket, but the bolt from the Equal-i-zer #EQ64FR that sits on top of the trailer frame is 5/8" in and of itself so you're looking at around 1-1/4" at the…
None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit #BWGNXA2061. The installed height of this…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Yes, it will! The Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems item #GY83XR is designed specifically to fit in the puck system of the Ram trucks. It'll work great with your 2021 3500 and yes it does use the center puck. I…
Congrats on the new truck! The Curt RockerBall Multi-Fit Ball Kit item #C78ZV will work great with the puck system in your new 2025 Sierra 2500. It's been specifically designed to work with all the OEM puck systems so the difference in…
Hey Rick, so we had a customer send us a picture (see attached) where they took that measurement for us and basically from the top of the hitch ball down to the bottom of the shoulder is 7 inches. This is essentially another way of measuring how tall…
Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…
Hello David, thanks for reaching out. The Curt Offset Ball #C68ZV will fit the 2024 GMC 2500, but it will only work on the 8' bed models. If you have the short bed, an additional piece, Curt part #60669 is required. The problem is this part will…
Filter Results
(2)
(1)
(1)
