Videos
for Trailer Hitch Ball
Help Articles
for Trailer Hitch Ball
Expert Answers
for Trailer Hitch Ball
Hey Andrew, the Fastway e2 system part #FA92-00-0800 would be a great option for a weight distribution system and sway control for your 2022 Forest River Cherokee Alpha that has a 720 lb tongue weight. Have you used WD systems before?
view full answer...Hey Scott, thanks for reaching out! I don't have the exact height of that bracket, but the bolt from the Equal-i-zer #EQ64FR that sits on top of the trailer frame is 5/8" in and of itself so you're looking at around 1-1/4" at the…
view full answer...If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…
view full answer......a help article that goes in to more detail for you. A good example of a Class II hitch that will fit on your 2015 Mazda CX-5 is the Curt Trailer Hitch Receiver Class II # C12170. This will fit on your...
view full answer...Hey Brian, the torque value for the bolts of the GM Gen-Y Gooseneck Adapter part #GY55XR is 23 ft lbs. I attached a picture of the manual.
view full answer...Hey Ozzie, since the Weigh Safe Hitch W/ Built-In Scale #WS56KR has a 1" ball shank hole you can use any hitch ball with that diameter like the 2" Hitch Ball #63845 which has a 2" diameter and a 7,500 lb capacity. If you have any other…
view full answer......Will the Curt Part Number: C68ZV Multi-Fit Ball Kit w/ 4 Offset fit my 2024 GMC SIERRA 2500 HD SLT? If not is there one like this that will fit...
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...No, you'll need a longer one since you have a Ford truck. The correct 4" Offset Ball for B&W Turnoverball on a 2013 Ford F-150 is item #BWGNXA4085. The 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitch for Dodge Ram…
view full answer......Box 20K and the Lippert Curt Air Ride Pin Boxes. Obviously with the short bed truck I’m concerned about turning radius and hitting the top of my bed rails. The superglide style hitches are probably more...
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
view full answer......Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part # C40034 that you referenced. The general rule is for a 3/4...
view full answer...