Trailer Hitch Ball - Double Lock Ball, 2-5/16 Inch Diameter Ball

Hey Andrew, the Fastway e2 system part #FA92-00-0800 would be a great option for a weight distribution system and sway control for your 2022 Forest River Cherokee Alpha that has a 720 lb tongue weight. Have you used WD systems before?

Hey Scott, thanks for reaching out! I don't have the exact height of that bracket, but the bolt from the Equal-i-zer #EQ64FR that sits on top of the trailer frame is 5/8" in and of itself so you're looking at around 1-1/4" at the…

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Brian, the torque value for the bolts of the GM Gen-Y Gooseneck Adapter part #GY55XR is 23 ft lbs. I attached a picture of the manual.

Hey Ozzie, since the Weigh Safe Hitch W/ Built-In Scale #WS56KR has a 1" ball shank hole you can use any hitch ball with that diameter like the 2" Hitch Ball #63845 which has a 2" diameter and a 7,500 lb capacity. If you have any other…

Hello David, thanks for reaching out. The Curt Offset Ball #C68ZV will fit the 2024 GMC 2500, but it will only work on the 8' bed models. If you have the short bed, an additional piece, Curt part #60669 is required. The problem is this part will…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

No, you'll need a longer one since you have a Ford truck. The correct 4" Offset Ball for B&W Turnoverball on a 2013 Ford F-150 is item #BWGNXA4085. The 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitch for Dodge Ram…

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…