Trailer Hitch Ball - 10000 lbs GTW

Hey Brian, Based on the numbers you provided your trailer has a 1621 pin box bolt pattern and would need the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP94716. Since you have the factory puck system I recommend the B&W Ball…

None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit #BWGNXA2061. The installed height of this…

Hey Lyle, we actually have a version of the Gen-Y offset gooseneck ball that was designed to fit the OEM gooseneck hitch of your 2017 Ford F-250 with the part #GY43XR. This provides up to 5 inches of additional offset to help with turning clearance.…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

Hey Rick, so we had a customer send us a picture (see attached) where they took that measurement for us and basically from the top of the hitch ball down to the bottom of the shoulder is 7 inches. This is essentially another way of measuring how tall…

No, you'll need a longer one since you have a Ford truck. The correct 4" Offset Ball for B&W Turnoverball on a 2013 Ford F-150 is item #BWGNXA4085. The 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitch for Dodge Ram…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey Mark, Nope, your long bed GMC Sierra 3500 won't require the use of an offset gooseneck hitch ball with the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY58GR. With the gooseneck prep package you can use a standard hitch ball, the B&W Ball…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

Hey Brian, Based on the numbers you provided your trailer has a 1621 pin box bolt pattern and would need the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP94716. Since you have the factory puck system I recommend the B&W Ball…

None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit #BWGNXA2061. The installed height of this…

Hey Lyle, we actually have a version of the Gen-Y offset gooseneck ball that was designed to fit the OEM gooseneck hitch of your 2017 Ford F-250 with the part #GY43XR. This provides up to 5 inches of additional offset to help with turning clearance.…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

If you were to use the 4 inch offset ball #BWGNXA4085 the pin weight on the ball will not be changed. What will change is where the weight is carried on the truck. Using the offset ball will put more weight 4 inches back from the center of the…

Hey Rick, so we had a customer send us a picture (see attached) where they took that measurement for us and basically from the top of the hitch ball down to the bottom of the shoulder is 7 inches. This is essentially another way of measuring how tall…

No, you'll need a longer one since you have a Ford truck. The correct 4" Offset Ball for B&W Turnoverball on a 2013 Ford F-150 is item #BWGNXA4085. The 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitch for Dodge Ram…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey Mark, Nope, your long bed GMC Sierra 3500 won't require the use of an offset gooseneck hitch ball with the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY58GR. With the gooseneck prep package you can use a standard hitch ball, the B&W Ball…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…