Filter by Style of Tool
$14.73 - $14.73
Videos
for Tools
Help Articles
for Tools
Expert Answers
for Tools
At this time we only know the Replacement Clutch Assembly #3371401150 to work on the following salt spreaders. Air-Flo part number A40032 Henderson part number 51873 Swenson part number 04138-017-00 Hi-Way part number 41719 Meyer part number 61167…
view full answer...Grease seal set #RG06-050 is what you will need. These are double lip seals, just like what you have (the spring indicates that) and the dimensions are all the same including the 1/2 inch width.
view full answer...If you look at the wheel cylinder of the brake assemblies part #23-399 and #23-398 you'll see the letters L and R stamped on them. The R means right hand side and L means left. I attached a picture that points out the letter. Right side…
view full answer...Thanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator #T1607500. For a Model 10 actuator, the #DX66FR that you referenced…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...In order to determine which bearings and grease cap are need for your 1999 Pace American Cargo Sport Trailer, we will need the numbers on your current inner and outer bearings. If you are unable to read the numbers you can use a digital caliper to…
view full answer...My bearing cross reference does not include the Bower bearing numbers BT1151 and T09074 so in order to see if we have a hub that uses compatible bearings you'll want to measure your spindles at the points C and D shown in the linked image.…
view full answer...You could install the Rack'em Fitz-All Enclosed Trailer Ladder Rack Item #RA-28 on your trailer and mount the Thule HideAway Awning - Wall Mount - Waterproof - 80 sqft Item #TH490011 to it. Attaching it to the rack will allow you to place…
view full answer...I would love to help but we don't have any bearing or seal information for specific trailers. This is just not information that the manufactures release to the public. If you want to find the correct replacement bearings and seals you will…
view full answer...Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures…
view full answer...The P-15 model information you provided for your Dexter axle does indicate its model, but you will still need to note its length and capacity before locating the correct replacement. If you are able to find a longer serial number somewhere on the…
view full answer...The torque requirements for leaf spring u-bolts depend on the diameter of the u-bolts that are being used. If the gross weight of your tandem axle trailer is 7,000 lbs, then you likely have two 3,500 lb axles. Typically 1/2 inch diameter u-bolts…
view full answer...