1. Home
2. Trailer Parts
3. Tire Repair Tools
4. Nickel Plated Brassx

Since wheels will be able to withstand the psi rating of any of the tires that are meant to fit it you will need to look at the valve stem as that is the deciding factor. If your valve stem has the rubber all the way up to the threads, like part…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I am sorry Darrel there is not. It looks like the shortest gooseneck/5th wheel wiring kit for a 2025 Ford F-350 is going to be the 9' long Bargman item #50-97-410-010 you were looking at. They make them that long because some people like to put…

Measure the diameter of the hole the the valve stem is coming through in the picture you submitted. With that you'll be able to find which valve stem you need. The two common sizes are .453 and .625 inch which the part #AM20906 is a confirmed fit…

Yes, they will so long as the GM factory TPMS valve stems you're using have a 0.453" valve stem. The Sendel Aluminum Mod Trailer Wheel item #AM22646 you were looking at requires a 0.453" valve stem. Additionally, you'll want to…

Yes, the load range E Taskmaster ST235/80R16 Radial Trailer Tire #TTWTRTM2358016E will fit a 16x6-inch-wide rim such as #TA73VR. This tire also fits wider 16-inch rims: 6-1/2-inch, 7-inch and 7-1/2-inch. When mounted and fully inflated the overall…

Hi Dustin, The Aluminum AM03 Series Black Machined Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 #AM43NR does not come with the valve stem, but we do have one. I reached out to the manufacturer, Americana, for you and they verified the valve…

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

Hello Joseph, thanks for getting in touch. What I recommend for you is the Americana Metal, Bolt-In Valve Stem #AM20906. This will fit both the 0.453" and 0.625" hole sizes. It is made of chrome plated brass and can handle up to 200 PSI. We…

Hey Jason, for a set of metal valve stems that fit your 2023 Grand Design 2910BH we have the part #AM20906 that you referenced which will fit and work great with your TPMS cap sensors.

The difference between the two rim designs you mentioned is just a visual difference. The mini mod wheels are a white rim that have small circles that run around the mounting flange of the rim whereas the other white style you referenced has…

The four rims you referenced are all VERY similar. They are all the same size, bolt pattern, pilot diameter, and very similar finishes. The #AM20797 has a 3,750 lb capacity and has a bit of flake in the powdercoat. The #AM20794 has a 3,960 lb…