Tie Down Anchors - etrailer

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

Hey Scott, thanks for reaching out. A 3-5/16" hole saw is what we recommend for installing the Square D-Ring Tie-Down Anchor #ABS69FR to the floor.

No, I am sorry we do not. I checked with Timbren's website and their 7,000 lbs item #TASR7KS01 and item #TASR7KS02 are the highest capacity ones you can get with a spindle. Did not see an 8,000 lbs capacity option. The Timbren Silent Ride…

Hello Josh, thanks for reaching out. The Self-Contained Hydraulic Jack #e33VV cannot be powered by the 7-way. It needs its own full size deep cycle RV/marine battery. You will also need battery cables for connecting to the HPU.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Mike, so the jack legs of the Trailer Valet Drill-Powered Stabilizer Jack #TV68FR do operate independently so you can lower them down to match the uneven ground the best it can. You should note these are not leveling jacks so you wouldn't…

Hi Derrick, The Trailer Hitch Receiver Mounted Forged Tow Eye #TR63045 shank is 1-7/8" x 1-15/16" with rounded corners, which would explain the amount of play you've been experiencing. We have a few other options in this weight class…

Hi Jerry; an air compensated pintle hook like the Buyers Products 50 Ton Air Compensated Pintle Hook with Chamber and Plunger #337PH50AC is going to be the best option. However, none of our pintle hitch plates like the #3371809040 you looked at have…

Hello John, thanks for reaching out. The Rack'Em Heavy Duty Stake Pockets #PK-BSP do not have a specific weight capacity. This is mainly because the actual capacity will largely be dependent on how it is attached. The same can be said for all of…

Hey Troy, with the Dometic Penguin II with heat pump part #DMC38ZR you can use a wall thermostat with the part #DMC23ZR and the manual air box part #DMC43ZR but there isn't a remote controller option available at this time.

From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…