1. Home
2. Trailer Parts
3. Tie Down Anchors
4. PackEmx

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

Hey Scott, thanks for reaching out. A 3-5/16" hole saw is what we recommend for installing the Square D-Ring Tie-Down Anchor #ABS69FR to the floor.

No, I am sorry we do not. I checked with Timbren's website and their 7,000 lbs item #TASR7KS01 and item #TASR7KS02 are the highest capacity ones you can get with a spindle. Did not see an 8,000 lbs capacity option. The Timbren Silent Ride…

Hi Derrick, The Trailer Hitch Receiver Mounted Forged Tow Eye #TR63045 shank is 1-7/8" x 1-15/16" with rounded corners, which would explain the amount of play you've been experiencing. We have a few other options in this weight class…

Hey Mike, so the jack legs of the Trailer Valet Drill-Powered Stabilizer Jack #TV68FR do operate independently so you can lower them down to match the uneven ground the best it can. You should note these are not leveling jacks so you wouldn't…

I sure can Mark and thanks for the information! The Dexter 3,900 lb torsion axles use the same bearings as 3,500 lb axles. Which means the correct replacement bearing kit is the item #BK2-100 you were looking at. You'll need one set per hub. Your…

Hello David. All of the 2-1/4" or 2-1/2" long 9/16" wheel studs we offer have a knurl diameter of .68, such at the Kodiak Wheel Bolt #K916WB25. We do not have anything with a knurl size of .60 or .62. We do have some 1/2" studs…

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Arlin, don't worry - those two wheels are virtually interchangeable. The 15" x 6" like #AM20522 is only ~1/2" wider than the 15" x 5" wheels like #AM20422 that you currently use, so the difference is negligible. If there…

Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long #RTC14 and rivet it to the roof. If needed you can cut the…