1. Home
2. Trailer Parts
3. Tie Down Anchors
4. CargoSmartx

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long #RTC14 and rivet it to the roof. If needed you can cut the…

Hey Scott, thanks for reaching out. A 3-5/16" hole saw is what we recommend for installing the Square D-Ring Tie-Down Anchor #ABS69FR to the floor.

...19148 CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long, part # 3481788 As you can see, each track is 5' in length, but the E-Track has a higher weight rating than...

Hello Ron. We do offer tie downs that can be used for a wheelchair. I recommend the Erickson Aluminum O-Track Kit #EM85JV. This comes with two 18" sections of track along with four o-rings. You can use straps like the Erickson Re-Tractable…

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

Hi Thomas, Appreciate that info, and we do have the right TorkLift camper tie-downs for your 2023 Ford F-350 with an 8 foot bed and the factory hitch. The correct tie-downs for your truck are the following: - TorkLift Tie Downs - Custom Frame Mount -…

Good evening! The Brophy Stake Pocket Tie Down Anchor item #TL2B you were looking at is going to be your best option. They fit the standard 2" x 4" stake pocket, have a 4,000 lbs capacity each, and measure 8-1/4" tall x 3-1/2"…

Stainless steel hardware would be the best type to use when installing the Tow-Rax Low-Profile Floor Track for Tie-Down Anchors #TWSP72TA to prevent corrosion.

Hi Noel; the Rhino-Rack Backbone #RRRFRB1 is not a fit for your 2023 Nissan Armada. If you want to add the Pioneer Platform to your vehicle you can use the #RR92AP which attaches to your raised rails.

The mount stud tie-downs #TWSPDSTD225 will work with Tow-Rax Low-Profile Floor Track for Tie-Down Anchors #TWSP72TA. When using the #TWSPDSTD it has a breaking strength of 5,000 lbs and a working strength of 1,666 lbs. I attached a review video for…

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long #RTC14 and rivet it to the roof. If needed you can cut the…

Hey Scott, thanks for reaching out. A 3-5/16" hole saw is what we recommend for installing the Square D-Ring Tie-Down Anchor #ABS69FR to the floor.

...19148 CargoSmart Horizontal or Vertical X-Track - Matte Black - Steel - 667 lbs - 5' Long, part # 3481788 As you can see, each track is 5' in length, but the E-Track has a higher weight rating than...

Hello Ron. We do offer tie downs that can be used for a wheelchair. I recommend the Erickson Aluminum O-Track Kit #EM85JV. This comes with two 18" sections of track along with four o-rings. You can use straps like the Erickson Re-Tractable…

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

Hi Thomas, Appreciate that info, and we do have the right TorkLift camper tie-downs for your 2023 Ford F-350 with an 8 foot bed and the factory hitch. The correct tie-downs for your truck are the following: - TorkLift Tie Downs - Custom Frame Mount -…

Good evening! The Brophy Stake Pocket Tie Down Anchor item #TL2B you were looking at is going to be your best option. They fit the standard 2" x 4" stake pocket, have a 4,000 lbs capacity each, and measure 8-1/4" tall x 3-1/2"…

Stainless steel hardware would be the best type to use when installing the Tow-Rax Low-Profile Floor Track for Tie-Down Anchors #TWSP72TA to prevent corrosion.

Hi Noel; the Rhino-Rack Backbone #RRRFRB1 is not a fit for your 2023 Nissan Armada. If you want to add the Pioneer Platform to your vehicle you can use the #RR92AP which attaches to your raised rails.

The mount stud tie-downs #TWSPDSTD225 will work with Tow-Rax Low-Profile Floor Track for Tie-Down Anchors #TWSP72TA. When using the #TWSPDSTD it has a breaking strength of 5,000 lbs and a working strength of 1,666 lbs. I attached a review video for…