Tie Down Anchors - Angle Mount

A keen observation indeed, Brett. The mounting hole spacing on the Square D-Ring Tie-Down Anchor #ABS69FR is 3" horizontally and 3-1/4" vertically. I edited a picture for you to help illustrate.

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

Hey Scott, thanks for reaching out. A 3-5/16" hole saw is what we recommend for installing the Square D-Ring Tie-Down Anchor #ABS69FR to the floor.

No, I am sorry we do not. I checked with Timbren's website and their 7,000 lbs item #TASR7KS01 and item #TASR7KS02 are the highest capacity ones you can get with a spindle. Did not see an 8,000 lbs capacity option. The Timbren Silent Ride…

Hello John, thanks for reaching out. The Rack'Em Heavy Duty Stake Pockets #PK-BSP do not have a specific weight capacity. This is mainly because the actual capacity will largely be dependent on how it is attached. The same can be said for all of…

Hello David, thanks for reaching out. The difference between the Brophy Stake Pocket Tie Down Anchors #TL1B and #TL2B is the D-ring size. The #TL1B has a 2-5/16" D-ring, while the #TL2B has a 3" D-ring. I have included a drawing with the…

...I recent purchased one of these. It said it was for a 2inch receiver but there is a LOT of play between the shaft and receiver. So much that the tow eye actually angles down some when installed. My...

Hi Jerry; an air compensated pintle hook like the Buyers Products 50 Ton Air Compensated Pintle Hook with Chamber and Plunger #337PH50AC is going to be the best option. However, none of our pintle hitch plates like the #3371809040 you looked at have…

The B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates #BWMC2300 does not need to be adjusted to the higher holes. The adjustability is dependent on the ground clearance of your frame. The B&W Biker Bar Motorcycle Tie-Down…

I just spoke with my rep at Timbren and the Timbren Silent Ride Suspension for Single Axle Trailers w/ 3-1/2" Round Axles - 8,000 lbs item #T54FR has a total travel of 2 inches.

8,000 lbs is the correct rating for the Silent Ride Suspension: - Timbren Silent Ride Suspension for Single Axle Trailers w/ 3-1/2" Round Axles #T54FR This is unique in that it is for round, 3-1/2 inch diameter 8k axles, which are often Dexter…

No, the Timbren #T54FR cannot be used as a triple axle (or tandem axle) set up; for a triple axle set up for 8,000 lb axles the only option is the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Triple 8K, 3" Trailer Axles…