Videos
for TPMS Sensor
Help Articles
for TPMS Sensor
Expert Answers
for TPMS Sensor
Yes, it does! The TST TPMS for RVs item #TST-507-RV-6-C actively monitors your tire's pressure even when your RV is idle. If your sitting for awhile, like days or even weeks, it will take up to a couple minutes for the sensors to send data. What…
view full answer...According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…
view full answer...The valve stems that come with the Tuson Towable Tire Pressure Monitoring System - 6 Sensors #335TPMS6WIVS are a little longer than what the standard valve stem length is so you could potentially run into a problem fitting an air hose over it with a…
view full answer...We do carry the Wheel Masters Support Brackets for Rubber Valve Stems #WM8029VS which are designed to be used on 16 inch wheels. From the measurements and descriptions you have for your RV, I do suggest going with these. The TST TPMS for RVs…
view full answer...Hey Neal, It's totally normal to add on an air chuck extension to your compressor or the Viair Portable RV Air Compressor Kit #VA99WR you were looking at to reach the inner tire of a dual wheel setup. We currently only offer one solid extension…
view full answer...Hey Max, the battery life of the sensors that come with the TST TPMS #TST34FR is 1 year to 1.5 years.
view full answer...According to TST, once the repeater is installed, the sensors included with the #TST-507-INT-6-C will work within 5 minutes. My representative tells me that the expected battery life is 3-5 years, and once the battery goes dead, the sensor itself…
view full answer...Hey Eric, thanks for getting in touch. The Aluminum Eagle Trailer Wheel #LH67VR itself does not have a max PSI rating. The max PSI for the wheel is determined by the valve stem which in the case of the #LH67VR wheel is a rubber valve stem rated for…
view full answer...Hello Shane, Great question, and I am going to need you pin box number to ensure we are getting you the right part number. If you are unsure of your pin box number, please feel free to send me the information off of the sticker on your current Pin…
view full answer...For a TST TPMS system with a total of 12 sensors you'd need the part #TST-507-FT-6-C for the color display setup with 6 sensors and then you'd need a quantity of 3 of the part #TST-507-FT-S2 which is a pair of sensors. The prices are…
view full answer...Hello Dennis, thanks for reaching out. The repeater, or lack thereof, would definitely explain why your monitor is not picking up the sensors. I took a screenshot of the installation instructions for the Signal Booster/Repeater #TST-507-R and…
view full answer...If you have valve stems with a metal body like the Americana Metal, Bolt-In Valve Stem part #AM20906 then you will want to use flow-through sensors but if you have valve stems with a rubber body like the Americana Rubber, Snap-In Valve Stem part…
view full answer...