Filter by Type
$63.35 - $139.99
Videos
for Snowmobile Trailer Parts
Help Articles
for Snowmobile Trailer Parts
Expert Answers
for Snowmobile Trailer Parts
Hey Brock! I reached out to Caliber and they said the Caliber Edge Glide 2.0 Transition Plate for Enclosed Trailers #CA62TJ does not have a weight capacity. The material will bend before breaking. They also said these work great on car haulers so you…
view full answer...Hello Robert, Yes, the only difference between the 2 is that the etrailer Enclosed Trailer Transition Plate #e32JR is quantity: 1, and the #e99RV is quantity: 2. Right now it looks like if you wanted a better deal to buy 2 of the #e32JR. It is times…
view full answer...Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
view full answer...Hey Joe, that's a great question but the 7,600 lb capacity for the CE Smith Safety Chains is for the pair and not individually. How much capacity are you needing?
view full answer...Arlin, don't worry - those two wheels are virtually interchangeable. The 15" x 6" like #AM20522 is only ~1/2" wider than the 15" x 5" wheels like #AM20422 that you currently use, so the difference is negligible. If there…
view full answer...Hey Thomas, the most important factors for picking out a replacement leaf spring for a trailer are matching axle capacity and length. Getting the same amount of leaves in the spring pack is actually not a huge priority so I wouldn't worry too…
view full answer...There is no mounting hardware included with the Aluminum A-Frame Trailer Tongue Toolbox, item #350970, due to the different construction and mounting locations that may be required for many different styles of trailers. I would recommend using a…
view full answer...Hello Raul, Thank you for the pictures. What happened to your cover, baseball sized hail storm? I tried all my tricks but cannot fully identify the jack, I believe it was made by a company that is no longer in business. All the jacks now a days have…
view full answer...The Erickson E-Track is pretty rugged stuff, I doubt that the snowmobile track would crush it. Because of the studs, you might consider installing the etrack so that its let into the floor so that the face is flush with or slightly recessed from the…
view full answer...Based on my research on the Karavan Trailer website most of their snowmobile trailers such as their Ultra-101-12-WB use hubs with a 5-on-4-1/2-inch bolt pattern. The supplied wheels are 14-inch and are fitted with an ST205/75D14-inch tire, which is a…
view full answer...We offer a 215/60-8 tire on an 8 x 7 galvanized rim with a 5 on 4-1/2 inch bolt pattern in a load range C with a 935 lb capacity as part #AM3H320 or a load range D with an 1165 lb capacity as part #AM3H325. Kenda describes the tread as being for all…
view full answer...To select replacement electric brake assemblies for your 1997 Featherlite horse trailer you'll need to confirm a few details about your trailer set-up. First you need to confirm the axles' capacity to ensure your new brakes will have the…
view full answer...