Snow Plow Parts - Pins

We do have a shoe for a Meyer snowplow with a 3/4" diameter shaft, the Replacement Shoe Assembly for Meyer Snowplow - Standard (Drive Pro) #3371303002. I have added a link to a video review with dimensions of this part for you to check out as…

Hey Aaron! I am going to recommend you go with the Firestone Air Bags item #F95FV over the Air Lift item #AL29DQ you were looking at. They both use good air bags but the Firestones are quite a bit more durable. They use a crimp rolled design as…

In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.

The diameter of the shaft on the Replacement Shoe Assembly #3371303003 is 1-1/4 inches and the length is 8-3/4 inches.

It appears there is not a ultimate plus kit available for the 2023 F250 at this time. Even air lift does not list one in their catalogue. It is possible that they will come out with one in the future, but there is really no reason to wait for them to…

For the replacement cutting / lead blade you will want to check out Replacement Cutting Edge #3371301220 and Replacement Cutting Edge #3371301291. Both blades are 8' long and 6" tall with 13" between bolt holes just like you wanted. The…

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

The Curt Front Mount Trailer Hitch Receiver #C31015 is the better option for use with a snow plow on your 2014 Ram 2500. The receiver is lower on truck giving it a better angle, where the EcoHitch #306-X7900 would place the snow plow at a sharp…

...On the winch there is a u-bolt that needs to get removed after feeding the strap all the way out. He said this is pretty obvious and easy to do. Next, there is a pin holding the strap to the spool. On the side...

We do have a shoe for a Meyer snowplow with a 3/4" diameter shaft, the Replacement Shoe Assembly for Meyer Snowplow - Standard (Drive Pro) #3371303002. I have added a link to a video review with dimensions of this part for you to check out as…

Hey Aaron! I am going to recommend you go with the Firestone Air Bags item #F95FV over the Air Lift item #AL29DQ you were looking at. They both use good air bags but the Firestones are quite a bit more durable. They use a crimp rolled design as…

In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.

The diameter of the shaft on the Replacement Shoe Assembly #3371303003 is 1-1/4 inches and the length is 8-3/4 inches.

It appears there is not a ultimate plus kit available for the 2023 F250 at this time. Even air lift does not list one in their catalogue. It is possible that they will come out with one in the future, but there is really no reason to wait for them to…

For the replacement cutting / lead blade you will want to check out Replacement Cutting Edge #3371301220 and Replacement Cutting Edge #3371301291. Both blades are 8' long and 6" tall with 13" between bolt holes just like you wanted. The…

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

The Curt Front Mount Trailer Hitch Receiver #C31015 is the better option for use with a snow plow on your 2014 Ram 2500. The receiver is lower on truck giving it a better angle, where the EcoHitch #306-X7900 would place the snow plow at a sharp…

...On the winch there is a u-bolt that needs to get removed after feeding the strap all the way out. He said this is pretty obvious and easy to do. Next, there is a pin holding the strap to the spool. On the side...