Replaces the hydraulic pump for your Fisher or Western snow plow. Comparable to Fisher part number 419211 and Western part number 49211.

Replaces 2 angle hoses and fittings for your Meyer hydraulic snow plow. 45" Long hoses have swivel fittings for simple installation. Also includes 2 swivel elbow fittings and 2 quick couplers.

Replaces 1 hydraulic hose for your Meyer snow plow. It has a 90-degree, 1/4" NPT, male swivel fitting on one end. Comparable to Meyer/Diamond part number 21856.

Replaces the seal kit for your Meyer E-46, E-47, or E-57 hydraulic snow plow. Comparable to Meyer/Diamond 15254.

Replaces the packing seals on the 1-1/2" ram cylinder of your Meyer snow plow. Kit includes 1 wiper, 2 hard plastic O-ring ends, and 5 washer gaskets. Comparable to Meyer part number 07705.

Replaces the cylinder cover and seal assembly for your Meyer E-47 hydraulic snow plow. Comparable to Meyer part number 15194.

Replaces the Cartridge 40 solenoid valve for your Fisher or Western snow plow. Includes the jam nut. Comparable to Fisher part number 7637K-1 and Western part number 49229.

Replaces the Cartridge 20 solenoid valve for your Fisher or Western snow plow. Includes the jam nut. Comparable to Fisher part number 7634K-2 and Western part number part 49227.

Replaces the hydraulic hose for the lift on your Curtis snow plow. It has a 7/16"-20 NPT female swivel fitting on one end and a 7/16"-20 NPT male fitting on the other. Comparable to Curtis part number 1TBP98B.

Replaces 1 hydraulic hose for your Western snow plow. It has FJIC ends. Comparable to Western part number 56616.

Replaces the crossover valve kit for your Meyer E-47 or E-60 hydraulic snow plow. Comparable to Meyer part number 15606.

Replaces the seal on the 1-1/2" cylinder of your Fisher snow plow. Kit includes 1 pack seal, 1 wiper, and 1 O-ring. Comparable to Fisher part number 56556.

Replaces the quick coupler for your Meyer, Diamond, Western, or Fisher snow plow. Comparable to Meyer part number 15072, Diamond part number 875200100, Western part number 25232, and Fisher part number A1587.

Replaces the bearings, seals, and O-rings for your Meyer E-60 hydraulic snow plow. Comparable to Meyer part number 15707.

Replaces the continuous-duty, 100-amp relay for your Western hydraulic snow plow. Comparable to Western part number 56131K.

Replaces 1 hydraulic hose for your Boss snow plow. Hose is reinforced by a steel braid and covered in neoprene for extra durability. Comparable to Boss part number HYD01810.

Replaces the packing seals on the 1-1/2" ram cylinder of your Fisher snow plow. Kit includes 1 wiper, 2 hard plastic O-ring ends, and 5 washer gaskets. Comparable to Fisher part number 339K.

Replaces the master seal kit for your Meyer E-46, E-47, or E-57 hydraulic snow plow. Comparable to Meyer part number 15456.

Replaces the pump shaft seal for your Meyer E-47 hydraulic snow plow. Comparable to Meyer part number 15581.

Replaces the 90-degree elbow fitting for your Western or Fisher snow plow. It includes a 6M O-ring. Comparable to Western part numbers 56615 and 56615-1 or Fisher part number 56725.

Replaces 1 hydraulic hose for your Boss snow plow. Hose is reinforced by a steel braid and covered in neoprene for extra durability. Comparable to Boss part number HYD01695.

Replaces the left-angle hydraulic hose for your Curtis snow plow. It has a 7/16"-20 NPT female swivel fitting on one end and a 7/16"-20 NPT male fitting on the other. Comparable to Curtis part 1TBP98D.

Replaces the Cartridge 30 solenoid valve for your Fisher or Western snow plow. Measures 3-1/2" long x 3/4" diameter and includes the jam nut. Comparable to Fisher part number 7636K-1 and Western part number 49228.

Replaces the coupler for the male hose and female block on your Meyer snow plow. Comparable to Meyer part number 15847C.