1. Trailer Parts
2. Snow Plow Parts
3. Guides and Markersx

We do have a shoe for a Meyer snowplow with a 3/4" diameter shaft, the Replacement Shoe Assembly for Meyer Snowplow - Standard (Drive Pro) #3371303002. I have added a link to a video review with dimensions of this part for you…

Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2" receiver to…

The diameter of the shaft on the Replacement Shoe Assembly #3371303003 is 1-1/4 inches and the length is 8-3/4 inches.

Hey Dale, while we don't have the linch pins that come with the part #BX88219 we do have the part #3371303033 that is a pair of 1/4 inch diameter pins.

For your 1999 Chevy Suburban K2500 that is 4WD the Detail K2 Storm II Elite part #K2STOR8422ELT would be a really great option. The blade is angle adjustable, it's a good size for a gravel driveway at 84 inch by 22 inch, and can…

In order to install the Detail K2 Summit II Snowplow #K2SUMM8826 on your 1996 Chevy Tahoe 4WD you will just need the Custom Mounting Bracket Kit #K283005. As long as your particular lift kit doesn't actually interfere with the…

Hey Kathleen, thanks for reaching out! If your Advent Air Low Profile RV Air Conditioner for Dometic Setup #ASA86YR isn't pushing out cold air then I recommend making sure cold air isn't blowing directly on the…

I went out to the warehouse and measured the Replacement Tire Mounting Hardware for Bumper Mounted Tire Carrier #2109 and measured 12.76mm (1/2") for the spline diameter, 29.48mm (1-5/32") for the thread length, and…

It looks like the S8SL Trailer Coupling Preparation is the factory wiring that allows you to connect an OEM wiring harness at the rear. I don't have any information on the exact location to check and see if you have this on your 2024…

I have attached a wiring diagram of the Replacement Hand Controller for Meyer Straight Blade Snowplow part #3371306901 to this answer page for you.

Absolutely. The Roadmaster InvisiBrake Supplemental Braking System #RM-8700 typically installs under the driver's seat for easy accessibility but it is not the only place it can be mounted. You can mount it anywhere in your towed…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

We do have a shoe for a Meyer snowplow with a 3/4" diameter shaft, the Replacement Shoe Assembly for Meyer Snowplow - Standard (Drive Pro) #3371303002. I have added a link to a video review with dimensions of this part for…

Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2"…

The diameter of the shaft on the Replacement Shoe Assembly #3371303003 is 1-1/4 inches and the length is 8-3/4 inches.

Hey Dale, while we don't have the linch pins that come with the part #BX88219 we do have the part #3371303033 that is a pair of 1/4 inch diameter pins.

For your 1999 Chevy Suburban K2500 that is 4WD the Detail K2 Storm II Elite part #K2STOR8422ELT would be a really great option. The blade is angle adjustable, it's a good size for a gravel driveway at 84 inch by 22 inch, and…

In order to install the Detail K2 Summit II Snowplow #K2SUMM8826 on your 1996 Chevy Tahoe 4WD you will just need the Custom Mounting Bracket Kit #K283005. As long as your particular lift kit doesn't actually interfere with…

Hey Kathleen, thanks for reaching out! If your Advent Air Low Profile RV Air Conditioner for Dometic Setup #ASA86YR isn't pushing out cold air then I recommend making sure cold air isn't blowing directly on…

I went out to the warehouse and measured the Replacement Tire Mounting Hardware for Bumper Mounted Tire Carrier #2109 and measured 12.76mm (1/2") for the spline diameter, 29.48mm (1-5/32") for the thread…

It looks like the S8SL Trailer Coupling Preparation is the factory wiring that allows you to connect an OEM wiring harness at the rear. I don't have any information on the exact location to check and see if you have this on your…

I have attached a wiring diagram of the Replacement Hand Controller for Meyer Straight Blade Snowplow part #3371306901 to this answer page for you.

Absolutely. The Roadmaster InvisiBrake Supplemental Braking System #RM-8700 typically installs under the driver's seat for easy accessibility but it is not the only place it can be mounted. You can mount it anywhere in your…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…