1. Home
2. Trailer Parts
3. Ratchet Straps
4. S-Hooksx

Hey Terry! According to page 318 of the manual, you can flat tow your 2024 GMC Canyon as long as it has the Two-Speed transfer case. If you do have the Two-Speed transfer case, then I recommend going with the Roadmaster Direct-Connect Base Plate Kit…

Hey Richard, I was able to determine that your 2016 Tail Trailer model 03 – PST2000 has a 2,000 lb axle setup so the correct idler hub would be the part #AKIHUB-545-2-G-2K which has the 5 on 4-1/2 inch bolt pattern you need as well. The trailer…

Hey Matt! Thanks for the picture and welcome back! I am sorry but I do not have any videos of the EcoHitch Hidden Front Hitch item #EH25HR being installed let alone a detailed one like you're requesting. That looks like chrome plated plastic.

Hi Derrick, The Trailer Hitch Receiver Mounted Forged Tow Eye #TR63045 shank is 1-7/8" x 1-15/16" with rounded corners, which would explain the amount of play you've been experiencing. We have a few other options in this weight class…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Gerald; we have seen complaints in the past that the Andersen won't sit flush when used with the B&W Ball and Safety Chain Kit #BWGNXA2061. I really like this gooseneck ball but since you're using the Andersen the Reese Elite Series…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

Hi Timothy; for your 2024 Chevy Silverado 1500 diesel we have the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. This is the only front hitch without the diesel restriction.

Hey John, Since body lifts only move the body away from the frame and don't change the distance between the frame and suspension the lift should be irrelevant to fitment in your case. For anti-sway bars I recommend the Roadmaster Front Anti-Sway…

Yes, there is and congrats on the new truck! The head on your B&W Companion item #BWRVK3500 or item #BWRVK3400 if you have the slider is removable from the gooseneck adapter base. Depending on the length of your bed and whether or not you need a…

Hey Terry! According to page 318 of the manual, you can flat tow your 2024 GMC Canyon as long as it has the Two-Speed transfer case. If you do have the Two-Speed transfer case, then I recommend going with the Roadmaster Direct-Connect Base Plate Kit…

Hey Richard, I was able to determine that your 2016 Tail Trailer model 03 – PST2000 has a 2,000 lb axle setup so the correct idler hub would be the part #AKIHUB-545-2-G-2K which has the 5 on 4-1/2 inch bolt pattern you need as well. The trailer…

Hey Matt! Thanks for the picture and welcome back! I am sorry but I do not have any videos of the EcoHitch Hidden Front Hitch item #EH25HR being installed let alone a detailed one like you're requesting. That looks like chrome plated plastic.

Hi Derrick, The Trailer Hitch Receiver Mounted Forged Tow Eye #TR63045 shank is 1-7/8" x 1-15/16" with rounded corners, which would explain the amount of play you've been experiencing. We have a few other options in this weight class…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Gerald; we have seen complaints in the past that the Andersen won't sit flush when used with the B&W Ball and Safety Chain Kit #BWGNXA2061. I really like this gooseneck ball but since you're using the Andersen the Reese Elite Series…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

Hi Timothy; for your 2024 Chevy Silverado 1500 diesel we have the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. This is the only front hitch without the diesel restriction.

Hey John, Since body lifts only move the body away from the frame and don't change the distance between the frame and suspension the lift should be irrelevant to fitment in your case. For anti-sway bars I recommend the Roadmaster Front Anti-Sway…

Yes, there is and congrats on the new truck! The head on your B&W Companion item #BWRVK3500 or item #BWRVK3400 if you have the slider is removable from the gooseneck adapter base. Depending on the length of your bed and whether or not you need a…