1. Home
2. Towing
3. RV and Camper Hitch
4. 47 - 77 Inch Wide Framex

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We highly recommend against double towing and many states either don't allow double (some states call it triple) towing or have numerous restrictions. Some states limit the total length of all 3 units, some only allow certain types of trailers…

...Appreciate the photos, and we do have a hitch for you, but the Curt # 13703 is for a max 72 inch wide frame measured outside to outside of the frame, and it looks like yours is 73 inches. So what you...

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hello Peter. I made a diagram with some dimensions of the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR for you. The distance from the back of the bracket to the end of the crosstube is about 8-11/16". I hope this helps and let…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Adam, so I sent your pin box info to Lippert so that I could verify what you have and found that you have the 1116 style pin box and that means the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY48FR that you referenced. I also…

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver #3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well.

The crosstube and the hitch tube of the Draw Tite Multi Fit hitch part #82201 that you referenced is 2-1/2 inch by 2-1/2 inch.