RV and Camper Hitch - 4-1/2 x 4 Inch Bumper

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hello Terrance, thanks for reaching out. You are wanting something to put on the 4" bumper on your motorhome, correct? If so, I recommend the Ultra-Fab Folding Spare Tire Mount for Trailers and RVs #UF15-954730. This will fit a 4" bumper…

Appreciate the photos, and we do have a hitch for you, but the Curt #13703 is for a max 72 inch wide frame measured outside to outside of the frame, and it looks like yours is 73 inches. So what you will need instead is a weld-on hitch that is…

We highly recommend against double towing and many states either don't allow double (some states call it triple) towing or have numerous restrictions. Some states limit the total length of all 3 units, some only allow certain types of trailers…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hello Peter. I made a diagram with some dimensions of the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR for you. The distance from the back of the bracket to the end of the crosstube is about 8-11/16". I hope this helps and let…

Hey Ron, thanks for reaching out! For your application I recommend checking out the Curt Adjustable Width Trailer Hitch Receiver for RVs #13703 which has a Class III rating and fits trailer frames within 22" - 72" so it's pretty…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The crosstube and the hitch tube of the Draw Tite Multi Fit hitch part #82201 that you referenced is 2-1/2 inch by 2-1/2 inch.

Hey Chris, thanks for reaching out! The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets #MO22FR can support up to 400 lbs of cargo and would allow you to use the full 350 lb tongue weight rating of a hitch receiver like the etrailer RV…

Hey Danny, what you would want is the ShakeStopper Heavy Duty 2 inch hitch part #MNT72VR which has a 400 lb tongue weight capacity and was designed with heavier bike racks in mind. The hitch you mentioned only has a 100 lb capacity so it would not be…

...Hey Guys, I am looking for a suitable bumper support struct for my trailer. The frame is I beam, there is a light gauge plate welded to the end for the span of the trailer that has a 2x4 steel hss...