RV and Camper Hitch - Buyers Products

Hello Peter. I made a diagram with some dimensions of the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR for you. The distance from the back of the bracket to the end of the crosstube is about 8-11/16". I hope this helps and let…

We highly recommend against double towing and many states either don't allow double (some states call it triple) towing or have numerous restrictions. Some states limit the total length of all 3 units, some only allow certain types of trailers…

Hey Adam, so I sent your pin box info to Lippert so that I could verify what you have and found that you have the 1116 style pin box and that means the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY48FR that you referenced. I also…

Appreciate the photos, and we do have a hitch for you, but the Curt #13703 is for a max 72 inch wide frame measured outside to outside of the frame, and it looks like yours is 73 inches. So what you will need instead is a weld-on hitch that is…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

...The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver # 3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed...

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

Hey Robert, so ideally yes the Goose Box would be your best option but I would need to know for sure what pin box your trailer has currently to know if the Goose Box would fit. If you can get me that info I can see which Goose Box would fit.…

I pulled one of the Curt Adjustable Width Trailer Hitch Receiver for RVs #13703 from the warehouse and measured it and found that the cross tube was approximately 68-3/8" in length. Knowing how manufacturers are I'm sure the intended size is…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…