1. Home
2. RV & Camper
3. RV Ventilation
4. RV Vents and Fans
5. 8-1/2 Inch Diameterx

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

Hey Mark, the MaxxFan communication cable part #MA59PR is an RJ45 data cable.

Hi there Mike! Yes, you can technically replace the Coleman Max Q AC in your 2024 Alliance 26RD with a MaxxFan, but there are a few things to keep in mind. The MaxxFan part #MA00-04500K will fit in the same 14" x 14" roof opening, which is…

Hey Mark, the oscillating vent of the Furrion Chill Cube #FR27TD points to the front. Is there anyway you could use it pointing forward?

Yes, it has! The current MaxxFan roof vents like item #MA00-06401K can be used with lithium batteries. There was an issue with the older models of the MaxxFans but they went to a different circuit board that can handle the higher voltage for this…

The roof vent on your trailer is most likely for black water tank. The Lippert Components 360 Siphon RV Holding Tank Vent Cap part #LC389381 has a base with a 4" outer diameter. The holes most likely won't line up with your existing roof…

Hi Steve; does your wall switch look like the #MA00A03550K? The Replacement MaxxFan Plus 4-Speed Roof Vent #MA00-04751KSX is designed to replace the 00-04751KS which works with this wired wall controller. If you have this switch, or the older model…

Hey Genny, the membrane that comes with the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane #344270KIT21 comes in a big roll. The thickness of the membrane is 27 MIL which makes it about .68 inch thick. Do you have any other questions? I…

Yes, we do Stephanie! It is the Specialty Recreation Low Profile Skylight w/ Inner Garnish and Sealant item #SR56RR. It measures 17-1/2" wide x 25-1/2" long and the bubble height is 4". It will fit over a standard 14" wide x…

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

Hello Mark. Great question. I am all about fixing what you have, however with part of it being delaminated you might want to take a closer look just to make sure that there is not severe water damage underneath. If the roof membrane is still in great…