1. RV & Camper
2. RV Trim
3. Bx

Hey John, thanks for reaching out! Aside from the Motor #LC132682 operating slower than the Motor #LC295380, there shouldn't be any problems or possible damage because these have the same 18:1 gear ratio and power settings.

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer…

We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item #LC168956 or the Replacement 18:1 High Speed Motor Assembly…

Hi Rick, LaSalle Bristol's roof membrane is made of PVC which is known to be durable and offer better protection against punctures and overall weathering. Alpha Systems offers TPO roof membranes that are more environmentally…

If your vinyl trim track on your travel trailer is 1 inch wide from outside edge to outside edge you'd need 3/4 inch wide vinyl trim as the trim fits into the track. So for 100 feet of black 3/4 inch wide trim you'd want the…

The trims inserts are a universal fit so the key to finding the correct one for your 2019 Keystone Premier travel trailer is to measure the trim to determine what the proper width would be. The Camco RV Vinyl Trim Insert #CAM25312-10 you were looking…

My contact at Redline told me that the outside diameter of the Chrome Trim #SA1012ET would be right at 5/16 of an inch and the inner diameter 1/8 of an inch. He said the trim isn't a perfect circle so the dimensions fluctuate a little bit.…

There is a gear in the housing of the Replacement 18:1 Venture Motor and Driveshaft with Right Angle Gear Box #LC117292 right by where you would bore through so you run the risk of it interfering with the operation of the motor. You'd also break…

The Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out part #LC295380 is only offered by Lippert as a complete unit with the motor and gear. The motor is not available separately from Lippert.

Yes, if you just need the motor from the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor #LC119128 then you'll need to get the following: - Replacement 18:1 High Speed Motor Assembly #LC295380

When replacing your vinyl molding trim you should measure the overall width of the trim. Since yours is 7/8" I recommend going with the 1" trim, and here are the available options in either White or Black: - 25 Feet: White #37210025 or…

The Rubber Trim for Vehicle Trim Molding, #SR78FR is 7/8" as shown in the attached and identified as fitting 3/4" tracks as measured on the inside, such as your measurement is taken.

Hey John, thanks for reaching out! Aside from the Motor #LC132682 operating slower than the Motor #LC295380, there shouldn't be any problems or possible damage because these have the same 18:1 gear ratio and power settings.

The best way to select the correct size vinyl trim insert is to measure the trim insert you have now while flat, not the track. We don't really recommend measuring the track as they are not all a standard width. That said, we only offer…

We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item #LC168956 or the Replacement 18:1 High Speed Motor Assembly…

Hi Rick, LaSalle Bristol's roof membrane is made of PVC which is known to be durable and offer better protection against punctures and overall weathering. Alpha Systems offers TPO roof membranes that are more environmentally…

If your vinyl trim track on your travel trailer is 1 inch wide from outside edge to outside edge you'd need 3/4 inch wide vinyl trim as the trim fits into the track. So for 100 feet of black 3/4 inch wide trim you'd want the…

The trims inserts are a universal fit so the key to finding the correct one for your 2019 Keystone Premier travel trailer is to measure the trim to determine what the proper width would be. The Camco RV Vinyl Trim Insert #CAM25312-10 you were…

My contact at Redline told me that the outside diameter of the Chrome Trim #SA1012ET would be right at 5/16 of an inch and the inner diameter 1/8 of an inch. He said the trim isn't a perfect circle so the dimensions fluctuate a little bit.…

There is a gear in the housing of the Replacement 18:1 Venture Motor and Driveshaft with Right Angle Gear Box #LC117292 right by where you would bore through so you run the risk of it interfering with the operation of the motor. You'd also…

The Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out part #LC295380 is only offered by Lippert as a complete unit with the motor and gear. The motor is not available separately from Lippert.

Yes, if you just need the motor from the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor #LC119128 then you'll need to get the following: - Replacement 18:1 High Speed Motor Assembly #LC295380

When replacing your vinyl molding trim you should measure the overall width of the trim. Since yours is 7/8" I recommend going with the 1" trim, and here are the available options in either White or Black: - 25 Feet: White #37210025…

The Rubber Trim for Vehicle Trim Molding, #SR78FR is 7/8" as shown in the attached and identified as fitting 3/4" tracks as measured on the inside, such as your measurement is taken.