Filter Products
Filter Results
$6.25 - $119.74
$69.99 - $69.99
$12.69 - $324.43
$17.20 - $324.43
$69.99 - $69.99
$32.94 - $115.17
Filter by Propane Accessory
$6.25 - $119.74
$69.99 - $69.99
$12.69 - $324.43
$17.20 - $324.43
$69.99 - $69.99
$32.94 - $115.17
Videos
for Propane Fittings
Help Articles
for Propane Fittings
Expert Answers
for Propane Fittings
A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.
view full answer...Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…
view full answer...To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…
view full answer...Yes, the Automatic Changeover RV LP Gas Regulator #37207-30395 will work to replace your Winntec 6020. This regulator uses the same sized fittings as your 6020 and the BTU rating of this is compatible.
view full answer...The MB Sturgis Single Stage Propane Regulator #108072 is the correct replacement for your GR-630 regulator #37207-30325. The in/out size on #37207-30325 is…
view full answer...You&am…
view full answer...For your propane tank with fill valve, you most likely need the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr #CAM59333. This will have the 1/4 inch NPt inlet and the 3/8 NPT outlet and will maintain a constant 11 inch water…
view full answer...There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per…
view full answer...Though your heater unit has a built-in regulator, it is only capable of handling a very narrow flow rate range. For this reason,…
view full answer...For a single tank setup the regulator you would want is the part #108220 which is rated for 400,000 btus. The regulator you mentioned does not have enough BTU.
view full answer...Thanks for the photos! Yes, the MB Sturgis Propane Pigtail w/ Back Check #100575-12-MBS has the connections needed for both the regulator and the propane tank on your 2021 Grand Design Imagine 22MLE travel trailer. If you wanted to get a pigtail…
view full answer...I looked up the hose and the regulator you currently have, and found that the GHA7 hose uses an ACME Nut connector to the LP tank and a 1/4 inch male inverted flare that connects to the 3/8 to 1/4 adapter used on the regulator. We offer the…
view full answer...Videos
for Propane Fittings
Help Articles
for Propane Fittings
Expert Answers
for Propane Fittings
A direct replacement for your Winntec Model 6020 is the Automatic Changeover RV LP Gas Regulator #37207-30395 as the BTU rating is compatible and they have the same fitting sizes.
view full answer...Yes, the #100019-24 pigtail can be used to connect your dual-cylinder 100 lb propane setup to the regulator on your RV. Since this hose does not have a back-check to contain a gas leak, you will need the #204120-MBS fitting that includes a…
view full answer...To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…
view full answer...Yes, the Automatic Changeover RV LP Gas Regulator #37207-30395 will work to replace your Winntec 6020. This regulator uses the same sized fittings as your 6020 and the BTU rating of this is compatible.
view full answer...The MB Sturgis Single Stage Propane Regulator #108072 is the correct replacement for your GR-630 regulator #37207-30325. The in/out size on #37207-30325 is…
view full answer...You&am…
view full answer...For your propane tank with fill valve, you most likely need the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr #CAM59333. This will have the 1/4 inch NPt inlet and the 3/8 NPT outlet and will maintain a constant 11 inch water…
view full answer...There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per…
view full answer...Though your heater unit has a built-in regulator, it is only capable of handling a very narrow flow rate range. For this reason,…
view full answer...For a single tank setup the regulator you would want is the part #108220 which is rated for 400,000 btus. The regulator you mentioned does not have enough BTU.
view full answer...Thanks for the photos! Yes, the MB Sturgis Propane Pigtail w/ Back Check #100575-12-MBS has the connections needed for both the regulator and the propane tank on your 2021 Grand Design Imagine 22MLE travel trailer. If you wanted to get a pigtail…
view full answer...I looked up the hose and the regulator you currently have, and found that the GHA7 hose uses an ACME Nut connector to the LP tank and a 1/4 inch male inverted flare that connects to the 3/8 to 1/4 adapter used on the regulator. We offer the…
view full answer...