Pintle Hitch - Tow Ready

Hey Chris, yes the TImbren part #T24CR does fit your 2024 Nissan Frontier 2 wheel drive.

The Buyers Products 50 Ton Heavy-Duty Swivel Type Pintle Hook #337BP880 can be used with either a 3/4" or 1" thick plate according to my contact at Buyers Products.

The centerline on the #BR27FR is going to be from the center of the hitch pin hole. If you draw a line straight out and measure the distance to the bottom of the hook that is 1". I have attached a diagram below for your reference.

Hey Craig, so the Curt pintle part #C48005 that you referenced is designed for lunette rings that are 2-1/2 inch in diameter like the part #RM-581 and not the 3 inch ring part #RM-583. For a similar pintle hook that fits both sizes we have the part…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The hole size needed for install of #337BP880 is 3 inch and the mounting bolt pattern is 4-1/2 inch by 4-1/2 inch. This attaches to a hitch plate and does not normally use a backing plate.

We do carry the hardware kit #3378530 which will fit the buyers Pintle hook #337PH45 that you were looking at. The bolts technically are made for the buyers 30 ton pintle hook like part #337PH30. They will fit the 45 ton just fine. These are the…

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

Hey Chuck, Yep, we do have the mounting hardware kit for the Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50. For that, what you need is the Buyers Products Pintle/Combination Hitch Mounting Kit #3378530. I went ahead and verified with…

Yes the Brophy Pintle Hook #BR27FR does fit a 3 inch diameter lunette ring like you mentioned as that's a standard size.

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…