Pintle Hitch - B and W

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

I've edited a photo for you that shows the bolt hole pattern of the Buyers Products #337BP200 Swivel Pintle Hook. If you click the provided link, you can see a product description video featuring the pintle hook.

...If you have a 2 inch receiver opening on the vehicle you will be towing with the B&W Pintle Hook Mounting Plate, part # BWPMHD14005 may work well for you. The mounting plate features 7 holes on each...

I do not have a cut sheet for Buyers 10-hole pintle hook part #337PH55 but the mounting hole diameter measures 0.812". The bottom mounting holes measure 1.062 inches center to center. From the center of the third mounting hole to the center of…

Hey Chris, yes the TImbren part #T24CR does fit your 2024 Nissan Frontier 2 wheel drive.

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Jason, yes the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6008 does fit your 2021 Ram 2500 long bed. To order this rack with a retractable tonneau cover you'd want the Pace Edwards part #JED7936-CR6008 instead.

Hello Robert. I looked up these monarch 5236 tail lights and from what I can see, this particular light is obsolete. We do have a good replacement option for you, but we do not offer a direct replacement. Our closest LED taillight assemblies we carry…

The hole size needed for install of #337BP880 is 3 inch and the mounting bolt pattern is 4-1/2 inch by 4-1/2 inch. This attaches to a hitch plate and does not normally use a backing plate.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

We do carry the hardware kit #3378530 which will fit the buyers Pintle hook #337PH45 that you were looking at. The bolts technically are made for the buyers 30 ton pintle hook like part #337PH30. They will fit the 45 ton just fine. These are the…