Lubricants Sealants Adhesives - 4500 psi

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

We recommended to repack the wheel bearings on your trailer every 12 months or 12,000 miles. There is not a specific guideline as far as actually replacing the bearings. When repacking them with grease, you will also just want to check for any damage…

Hey Chris! We don't have the O-rings individually but we do have the Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98" #xlprolube1980. These are the same caps that came with your disc brakes. If you need anything else feel free to reach…

Usually when you replace parts that get lubricated, you clean all of the existing grease first before adding any new grease, just in case there is a compatibility issue. Since you are using Dexter axles and replacing components with Dexter parts, the…

Hey Jason, since you have a Dexter 7,000 lb axle the correct bearing kit you would need is the part #BK3-210 which comes with the correct bearings and grease seal for a 7k hub. For grease I would recommend the LMX Red grease like part #L11390 for a…

Hey Brian, if you grab the magnet and move it in the direction of the arm that it is attached to far enough it will click and it will adjust the star wheel tighter. This will be the easiest way to move the shoes out. Or you can install them and then…

You are going to want either our Bearing Kit #BK2-100 or the Timken Kit #TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race…

Hello Daniel, Great question! The information that I am finding on 5957430 six lug S/N 121180384 is that it is a 5,200 pound axle. You will want the Bearing Kit #BK3-300. This kit is going to come with outer bearing LM67048, inner bearing 25580, your…

Hi Tony; the #BK2-100 and #TMK52VR come with the same size bearings and grease seal. The main difference is the Timken name. This is usually associated with a higher quality bearings that are made in the USA which also accounts for the higher cost.

Hello Jeffrey, Happy to confirm these parts for you. The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms #RM-524430-4 is going to be a great fit for your 2013 Ford Focus just as long as you do not have the ST model. Your Roadmaster…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Kevin, so this is a very valid question but the integrated brake controller of your 2024 GMC Sierra 3500 has a hydraulic mode which allows it to be compatible with EOH actuators like the Hydrastar kit part #HSE7K-T1 that you are interested in so…