1. Home
2. Trailer Parts
3. Horse Trailer
4. Horse Trailer Accessories
5. 25 Gallonsx
6. Plasticx

Hello Carolyn, On the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - Round - 30,000 lbs #CG, from the center of the ball to the farthest corner of the little red handle is 6-3/4 inches, so the recessed box needs to be 14 inches square and…

The Trailer Horse Pad Screw #PS-8 will allow you to install the 60" Horse Trailer Side Pad #HTP1260BK on your steel trailer/divider. This screw is 3/4" long and will require a 1/8" pilot hole on your steel trailer. I recommend using at…

Are the holes you are referring to threaded? If so then you could drill a 1/4" hole into one of our pads (see below) and then use a bolt to attach them to the wall. If the holes are not threaded then it may just be best to use a few phillips…

The Dometic 300 Toilet, #DOM64FR has a total length of 19-3/4" with a minimum distance from wall to center of 8-1/2". The Dometic 320, #DOM87FR is overall length of 22" with a minimum distance from wall to center of 11". If you…

We do have a selection of rubber mats that you can add to your gooseneck trailer which I have linked for you to filter through. The thickest rubber mat that we currently have to offer is the Ribbed Rubber Trailer Mat #4872SM. This mat measures…

Hey Joanne, I think I've found what you're looking for with the Surehoof Ribbed Rubber Trailer Mat #4872SM. This measures 48" x 72" which I would think is enough to cover your ramp and help your horse feel a little more comfortable…

Hey David, I haven't really heard from anyone saying their truck bed camper couldn't clear the cab, but vehicle manufacturers can make some wild changes after a couple of decades. With your truck being only a few years newer than the camper…

The best option we have for your 7' x 12' V-Nose trailer is the Adco SFS AquaShed Trailer Cover item #290-46002. This cover is 12' long x 8' 10" wide x 7' 10" tall. This cover has integrated straps and ropes to prevent…

When replacing your horse trailer pads, be sure to pad all dividers and walls. The pads are constructed of a very durable vinyl sewn over 2" of foam onto rigid cardboard. They stand the test of time and hold up in all climates. There is no need…

Hey Robert, the Torklift hitch you ordered does not come with new rear tie downs and you will need new ones. For that the correct rear tie downs is the part #TLR3510.

You have it right so far, the 4-way connector is just as you have stated. Remember that Yellow has a L in it so that is the left side brake/turn signal and green has a R in it so that is the right side brake/turn signal. The colors for wiring a 7-way…

No, I would not recommend using it as a step. The etrailer Trailer Tool Box item #e44VV was not designed to hold weight on top of the box. We have one here installed on a trailer and while it is solidly designed the top is not reinforced to withstand…