Hitch Fabrication Parts

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you…

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

Hi Ricky; the longest extender we have that fits a 2" receiver is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long #HE18. Are you trying to clear something specific on the back of your Sprinter? Depending on what…

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

Hello Pat. The Replacement Trailer Hub Wheel Stud #RG03-080 has a .545" knurl diameter. The distance from the cap to the threads is 1-3/16".

The Buyers Products Fabricators Hitch Plates like part #3371809042 are not given a weight capacity by the manufacturer. This is because the weight capacity will largely be dependent on how securely it is mounted. The highest rated pintle hook we…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

Hey Derrick, I checked directly with TorkLift for you, and the TorkLift Tie Downs - Front and Rear #TL87DR are a fit for the 2024 Ford F-350 with the bed access step near the cab. The #TL87DR are also specifically for an 8 foot long bed as well as…

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

I think the best option we have for you is a universal weld-on hitch plate like one of the following that I have attached for you. We do not really have any direct fit hitch plates for you so I think this will be the best option we can offer. If you…

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

Hi Ricky; the longest extender we have that fits a 2" receiver is the Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long #HE18. Are you trying to clear something specific on the back of your Sprinter? Depending on what…

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

Hey Spencer, we have confirmed in the past that the Andersen Ultimate hitches can be used with offset balls like the Gen-Y part #GY43XR.

Hello Pat. The Replacement Trailer Hub Wheel Stud #RG03-080 has a .545" knurl diameter. The distance from the cap to the threads is 1-3/16".

The Buyers Products Fabricators Hitch Plates like part #3371809042 are not given a weight capacity by the manufacturer. This is because the weight capacity will largely be dependent on how securely it is mounted. The highest rated pintle hook we…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

Hey Derrick, I checked directly with TorkLift for you, and the TorkLift Tie Downs - Front and Rear #TL87DR are a fit for the 2024 Ford F-350 with the bed access step near the cab. The #TL87DR are also specifically for an 8 foot long bed as well as…

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.