Hand Tools - Heat Guns, Trades Pro

Hey Steve! You're already on the right track with the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems #EQ95-01-5950. This is exactly what you need to install a WDH on your boat trailer. Go ahead and measure 27" - 32"…

Hey Paul! Thank you for providing that information. Since choosing a weight distribution hitch (WDH) is based on tongue weight the most important thing is your 490 lb measurement. Based on that I recommend the Equal-i-zer Weight Distribution System…

Hi David; you're on the right track with the tongue weight. The tongue weight capacity of your tow vehicle doesn't play a role in choosing a weight distribution hitch (WDH) aside from knowing your vehicle limitations. For a WDH you want to…

When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into consideration: 1.…

Between the two kits you mentioned the Equal-i-zer part #EQ37120ET is the best choice. This is the highest quality option out there for a weight distribution system and is what Curt tried to emulate with their TruTrack part #C17501. The Curt kit is…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

Hello Jeremy, thanks for reaching out. The Air Lift Air Helper Spring Cradles #AL59DQ will only work with the Air Lift brand bellows-style air bags. They will not work with the Firestone air bags.

Good morning, Ron! The Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is compatible with your factory gooseneck hitch ball just as it is. The Adapter #AN27VR you're looking at just gives you a better connection than the…

Both the Fastway #FA94-00-0600 and the Equal-i-zer #EQ37060ET are rated for 600 pounds tongue weight which once your trailer is loaded and you factor in any weight in the back of your 2016 Chrysler Town and Country that is right where you want to be.…

Hi David, Sure thing, I was able to get the dimension drawing showing the dimensions of the housing of the Self-Contained Hydraulic Jack #e33VV. As you can see, it sticks out 10.4" (about 10-7/16") from the back of the jack, 6" from…

The most important thing to know when selecting a weight distribution system is your total tongue weight, which is the tongue weight of your fully loaded trailer plus the weight of any cargo behind the rear axle of your 2016 Ram 1500. Your total…

Hey Nick, yes I would say that the Curt TruTrack 2P Weight Distribution System #C67ZV is rated too high for your Jayco Jayfeather. This has a tongue weight range of 800-1,000 lbs and you'd most likely have a tongue weight around 640 to 750 lb.…