1. Trailer Parts
2. Gooseneck Coupler
3. 3 Inch Gooseneck Ballx

None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit #BWGNXA2061. The installed…

There is not an inner gooseneck coupler square tube we carry that has the 3.5 inch outer dimension you referenced. All of the square gooseneck couplers we carry from all brands have the inner sleeve outer measurement of 4 inches on each side like…

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.…

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled.…

Hey Peter, with the InfiniteRule lock part #IR48FR installed in a Gen-Y Spartan Coupler like part #325-GH-7062 basically it prevents the latch mechanism from being able to roll back and either release or accept a gooseneck ball. It essentially…

I do have an option for you but we don't offer any inner tube square gooseneck couplers which measure 3-1/2" x 3-1/2" as this is not a standard size. That said, what you can do is install a new outer tube and…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, I do have options for a Ram 3500 to use with the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler part #CG. The Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches part #C60601 will work just fine. The issue with the…

The Shocker Hitch Air Cushioned Gooseneck Coupler part #SHK46MR that you referenced can be used with the 4 inch B and W offset ball part #BWGNXA4085 that you mentioned. In fact, the picture we got from Shocker Hitch that I attached to this page…

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler part #CG is designed to be used with set screws, we cannot recommend you drill to use a pin. That said, it will still work on an inner tube with pre-drilled holes for the pins so there…

There are two options you can use for a bit of added height when using your B&W Turnoverball Underbed Gooseneck Hitch #BWGNRK1016. You can get an extra 1" by using the High-Rise Ball for B&W Turnoverball…

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler, part #CG, will slide up in the 4 inch inner diameter tube that is on the trailer. It can be adjusted for height by using the set screws on the gooseneck trailer tube.