Folding Trailer Tongue - Up to 48 Inch Long, 3 x 3 Inch Tongue

...My pontoon trailer tongue tube is 3 wide x4 tall Do you have a swing away for that? Thanks...

...There is no difference other than part number between the HDPB340101 and the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301. We only offer the # FHDPB340301, but each bolt...

...part # FHDPW330300. The hinge kit is designed for 3 x 3 trailer tongues, so you'd need to use some steel plate to shim the width/height difference. You'd need to obtain a 36 inch length of 2.5 x 2.5...

...trailer tongue. It appears you will need the 3"X5" # FHDPB350101. We also have a 3"X4" # FHDPB340301 and 3"X3" # FHDPB330301. You will need to source the additional trailer tongue material from a local...

...I have a Fulton swing away tongue kit installed on my boat trailer. It has always had significant up and down play when closed that causes the trailer coupling to angle up slightly at the hinge...

Hey Mike! Sounds like you're needing the Easy Grease Trailer Idler Hub Assembly for 2K Axles #AKIHUB-545-2-EZ-2K. If you're wanting something with a better protective coating the Galvanized Hub #AKIHUB-545-2-G-EZ-2K will do the trick, but…

...Unfortunately, Fulton doesn't offer a a folding coupler hinge kit for a 2 x 2 inch trailer tongue. I have heard from some of our customers that they've used a couple of pieces of 1/2 inch steel plate...

...Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301 which fits 3" x 4" diameter tongues. This would allow you to replace the folding part of the tongue and add the new actuator. I have attached...

My contact at Fulton confirmed that the A60 series is now obsolete and they don't make replacement parts. For a replacement, I recomemend the Titan Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7K #T43397007K. This surge brake…

The Trailer Hub Assembly for 3,500 lb Axles, #84550BX, was confirmed by Dexter to be the assembly which replaced part 8-208, but please note that it does have a 5 on 5 bolt pattern, and you mentioned yours was a 5 on 4.5. To determine which bolt…

Hello Travis, I am running into the same issue as you. The closest thing we have to a 52" hub face, and 43" spring center is the CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K #CES84XR which is…

Hey Mike, so I went over the install instructions for the Roadmaster sway bar part #RM-1139-173-00 and there isn't drilling required to install the bar at all if the truck has a factory sway bar. If there is no sway bar present from the factory…