Enclosed Trailer Parts   >  

Fitz-All ladder racks do exactly that, they fit most trailer brands 4' to 8-1/2' wide with the telescoping design. Quick, easy assembly in about 5 minutes.

The built-in rain shield on this powered roof vent protects the interior of your RV or camper from rainwater. The reversible, 10-speed fan has a thermostat to regulate airflow inside your RV. Ceiling fan mode circulates air when vent is closed.

Replace the vent cover on your Elixir trailer roof vent (made after 1995) or your Ventline trailer roof vent (V2094 - made before 2008) with this equivalent part. Fits 14-1/4" x 14-1/4" openings.

This ladder rack allows you to carry 2 ladders or other similarly shaped gear on the exterior side wall of your enclosed trailer. Keeps ladders within easy reach. Includes 4 brackets, 2 towers, 8 bungee cords, and mounting hardware.

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Flat, low-profile metal vent cover opens and closes from inside with a hand-operated crank.

The variable-speed, reversible, 12-volt fan on this roof vent pushes stale air out of and pulls fresh air into your RV, camper, or enclosed trailer. Easy-to-use hand knob on vent housing allows you to lift and lower dome. Simple, 2-wire installation.

Cam-door style lock is ideal for use on trailer side doors that may be smaller than rear doors. Features 36" long pipe and rust- and corrosion-resistant zinc coating.

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Rounded, plastic vent cover opens and closes with the simple spin of a handle.

The built-in rain shield on this manual roof vent protects the interior of your RV or camper from rainwater. The 4-speed fan provides efficient airflow inside your RV. Ceiling fan mode circulates air when vent is closed.

The built-in rain shield on this manual roof vent protects the interior of your RV or camper from rainwater. The reversible, 10-speed fan has a thermostat to regulate airflow inside your RV. Ceiling fan mode circulates air when vent is closed.

Replaces the white, wedge-shaped, polypropylene plastic cover on your Ventline Ventadome RV roof vent.

Thermostat-controlled roof vent with 26 settings has a rain sensor so that the dome automatically closes and the built-in reversible, 12V fan shuts off if rain or snow hits. The powered lift eliminates hand cranking, and a remote control is included.

Replaces the cover on your Fan-Tastic Vent roof vent for motorhomes and enclosed trailers. Smoke-colored polyethylene dome filters UV rays while allowing light in.

These brackets let you create a fold-out workbench or seat in your enclosed trailer. Telescoping legs let you adjust height of bench. Mount to X-track and E-track rails. Fold flat against wall when not in use. Requires (1) 24" wide board.

Versatile table mounts to the wall and locks in place to support up to 100 lbs when in use. Unlock the struts and fold the table down for storage. Aluminum table extends out only 3" from wall when folded down and offers 6 sq ft of workspace.

Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of your ramp door freefalling.

This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with a hand-operated crank.

UV-resistant cover installs over your roof vent so you can open the vent and operate the fan in any weather. Removable bug screen keeps insects out. Zero-Leak mounting brackets and hardware eliminate the need to drill into your roof for installation.

Replaces the flat metal cover on Ventline Ventadome RV roof vents.

Cam-door style lock is ideal for use on trailer side doors that may be smaller than rear doors. Features 55" long pipe and rust- and corrosion-resistant zinc coating.

This spare tire holder for E-track and X-track lets you mount your spare tire up and off the floor in your enclosed trailer. Holds most automobile, trailer, and ATV tires. Can also be used with floor-mounted tracks.

Replacement smoke colored vent cover for Ventline old-style rounded dome trailer roof vents.