Emergency Vehicle Lights - Magnet Mount, Amber

Hey SC, so a keel roller like the Yates #YR12000 doesn't have a weight rating because it's not meant to bear the full weight of the boat. They're only meant to protect the keel of the boat from hitting into anything on the trailer. What…

Hey Dave, we can definitely help but we don't have any kits that work as both trailer wiring and tow bar lighting for your 2024 Ford Bronco so you'll need to install both kits separately. But they will work fine together. For tow bar lighting…

Hey Gary, For the wiring you'll need the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267. This will transfer your motorhome's traffic signals to the tail lights of your Bronco. If you find that you have variable voltage tail…

Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…

Yes, the correct surface mount bracket for the LumenX LED RV Dome Light part #PE65CR is the Surface Mount Bracket for LumenX part #PE76WR .

The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light #BUL43CB or Trailer tail Light #STL55RB which are actually 4-5/16" diameter x 1-15/16" thick. These are designed to fit the Rubber Grommet for 4"…

We have several exterior ladders that could potentially work for you and your trailer. Take a look at #LA-401. This ladder is 99-1/2 inches tall. It may require a little modification depending on the design of your trailer but it would work. I have…

Yes. If you don't need the weight distribution bars attached to carry the trailer to storage, you can absolutely use just the WD hitch head and ball to tow the trailer. It will work just like a ball mount.

I do see the winch and mount you found is for attaching to the Ford Modular bumper on your 2022 Bronco. For this I recommend the Roadmaster Direct-Connect Base Plate Kit #RM92ZR. Roadmaster has one of the best reputations for quality and testing…

Hi Tom, We do have a hitch and wiring for your 2024 Nissan Frontier, though the only wiring harness fit is a hardwire application and is not plug-and-play. For both parts here's what you'd need: - Curt Trailer Hitch Receiver #13241 - T-One…

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

Hey SC, so a keel roller like the Yates #YR12000 doesn't have a weight rating because it's not meant to bear the full weight of the boat. They're only meant to protect the keel of the boat from hitting into anything on the trailer. What…

Hey Dave, we can definitely help but we don't have any kits that work as both trailer wiring and tow bar lighting for your 2024 Ford Bronco so you'll need to install both kits separately. But they will work fine together. For tow bar lighting…

Hey Gary, For the wiring you'll need the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit #RM-15267. This will transfer your motorhome's traffic signals to the tail lights of your Bronco. If you find that you have variable voltage tail…

Probably not unless you want to cut that round hole into a 2-1/4" square. The Square A-Frame Jack w/ Footplate item #e74VV is designed for a-frame trailer's that have a square cut out not the standard 2-1/4" circular cut out which I am…

Yes, the correct surface mount bracket for the LumenX LED RV Dome Light part #PE65CR is the Surface Mount Bracket for LumenX part #PE76WR .

The closest to 4 inch round lights we have is the Optronics LED Trailer Utility Light #BUL43CB or Trailer tail Light #STL55RB which are actually 4-5/16" diameter x 1-15/16" thick. These are designed to fit the Rubber Grommet for 4"…

We have several exterior ladders that could potentially work for you and your trailer. Take a look at #LA-401. This ladder is 99-1/2 inches tall. It may require a little modification depending on the design of your trailer but it would work. I have…

Yes. If you don't need the weight distribution bars attached to carry the trailer to storage, you can absolutely use just the WD hitch head and ball to tow the trailer. It will work just like a ball mount.

I do see the winch and mount you found is for attaching to the Ford Modular bumper on your 2022 Bronco. For this I recommend the Roadmaster Direct-Connect Base Plate Kit #RM92ZR. Roadmaster has one of the best reputations for quality and testing…

Hi Tom, We do have a hitch and wiring for your 2024 Nissan Frontier, though the only wiring harness fit is a hardwire application and is not plug-and-play. For both parts here's what you'd need: - Curt Trailer Hitch Receiver #13241 - T-One…

There are a few differences between the BAK Revolver X2 and X4s tonneau covers. The X4s is the newest cover available by BAK, so it includes a new matte black finish on all sides, whereas the X2 will be matte on the top, and then silver on the…

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…