1. Home
2. Trailer Parts
3. Electrical Tools
4. Heat Shrink Tubingx
5. Redx

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

...going into the brake controller. Make sure you have power entering the brake controller on the black wire. On the red wire you will only want power when the brake pedal is pressed. If there is power...

Hello Jeffrey, Happy to confirm these parts for you. The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms #RM-524430-4 is going to be a great fit for your 2013 Ford Focus just as long as you do not have the ST model. Your Roadmaster…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

...I just watched one of your videos, and it recommended a RedArc tow pro liberty, trailer brake controller, for my 2017 Chevy Colorado. When I ed that unit to see the information on it, it says...

...power wire for you trailer's accessory lights. As far as installing the Redarc Tow-Pro Liberty Brake Controller item # RED52VR goes, you're looking for the brake switch wire. It will be a red wire coming...

Hey Robin, Both the Curt #C99DR and Tekonsha #TK32VR have the same fitments, our team that enters in all of this data to our Fitguide just hasn't gotten to the Curt harness yet. I will say that in terms of quality Tekonsha has been known to be…

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…

Both the Tekonsha Trailer Wiring Circuit Tester #8010 and the Hopkins Tow Doctor Trailer End Test Unit #HM50928 are for testing the wiring of your trailer. Both will work with incandescent and LED lights. However, the Hopkins will not display…

...do is use a circuit tester such as # PTW2993 to determine the functions of the 7-Way on the tow vehicle. Then you would place the red wire from the converter to the appropriate spot on the back...

Hey Frank, thanks for reaching out! The difference between the TowSmart Trailer Hitch Receiver #TS22VR and the Curt Trailer Hitch Receiver #C84BR is the tow ratings: TowSmart 4,500 lbs towing 675 lbs tongue Curt 4,000 lbs towing 600 lbs tongue…

Your brake lights and turn signals for each side are on one circuit. The left side turn signal and brake light is generally the yellow wire going into your trailer connector. The first thing to do is check the fuses on your tow vehicle. Next, inspect…