Filter Products
Filter Results
$58.29 - $58.29
$45.90 - $58.29
$26.77 - $51.56
Filter by Mounting Location
$58.29 - $58.29
$45.90 - $58.29
$26.77 - $51.56
Videos
for Dock Lights
Help Articles
for Dock Lights
Expert Answers
for Dock Lights
The Valley 7054 hitch is pretty old so info on it is harder to come by, but we do know that it is a slider hitch and that it fits the rails that the Reese adapter part #RP30156 provides. So if you have a 7054 hitch and a Ford truck with the factory…
view full answer...If your SuperGlide will work with industry standard fifth wheel rails that are 22 inches apart then the #RP30156 adapter will work for you. Some of the Pullrite hitches only fit their rails and adapters so if that is the hitch style you have then…
view full answer...Fifth wheel hitches can be pretty tall. Especially if you use a rail kit adapter like the #RP30156 which will add 2-3/4 inches from the floor of the truck bed to the top of the rail kit adapter. Most likely your Pullrite is going to sit too tall to…
view full answer...The 2.441" Bearing Buddy Bearing Protectors #BB2441SS is the next size up from the 2.328" #BB2328SS.
view full answer...The correct Bearing Buddy size needed for the Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles #8-213-51UC1-EZ is 2.44". That being said, you can use the: -Bearing Buddy Bearing Protectors #BB2441SS for stainless steel. Or -Bearing…
view full answer...Grease seals are best matched by part number but when this is not possible measuring inner and outer diameters to the nearest thousandth of an inch (1.234-inches for example) is necessary to ensure a proper seal at the spindle and hub bore. A digital…
view full answer...Often an axle's weight rating will appear on a sticker or plate on the axle beam itself, or sometimes the trailer's main identification sticker will include axle ratings. This is helpful unless of course the axles have been replaced during…
view full answer...You are correct that the zerk fitting on your spindle will need to be removed for you to use the bearing buddy, but the great part is the bearing buddy will be able to push grease through the spindle providing grease through the spindle to the inner…
view full answer...The Bearing Buddy Bearing Protectors #BB2441SS are not threaded. These are simply pushed into place. If you need this same size but that are threaded then the part number you're looking for is #BB2441T-SS instead. Same specs and still stainless…
view full answer...The CIPA Retractable Dock Cleat part #CM02100 doesn't come with hardware nor can we really advise on what you need exactly as it comes down to the specific application you'll be installing it on which will not be the same for every person.…
view full answer...For trailer tire and wheel combo #AM32001HWTB I recommend Trailer Wheel Lug Nut #12CLN. These are sold in quantities of 1. On aluminum wheels you will need a long, thin lug nut like this because you wouldn't be able to get a socket around a…
view full answer...Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…
view full answer...