Car Tie Down Straps - Steel Hooks, Bulldog Winch

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

Yes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 #e66RR which is a nice kit that includes 4 plates and all the necessary…

...317-18900 are designed to fit a tire up to 12-1/2" wide and 33" tall. Each strap has a working load limit of 1,830lbs. The Bulldog Winch Ratcheting Wheel Tie-Down Strap # BDW20362 will fit tires up to 37...

Hey Rob, A 7k axle would have a 3" diameter tube so the CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles #CE23003 would be the correct fit. These kits are for one axle each so you'll need to purchase one for each axle on your…

The best way to secure a vehicle to trailer is with a wheel net. This takes the guess work out of finding tie-down points on the vehicle and it's the most secure method. The easiest option would be to install e-tracks like the etrailer Horizontal…

...The Bulldog Winch Ratcheting Wheel Tie-Down Strap # BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your...

E-track can be driven over and it will be fine. It would not collapse or otherwise damage itself. You could use and drive over the Erickson Horizontal E-Track #EM19147. Then for a wheel strap the Erickson E-Track Wheel Tie-Down Strap with Roller…

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.

E track like the part #E19148 (5 foot section) would work well for what you are looking to do. People use E track for car haulers all the time and it works well. We even have a wheel strap designed for E tracks, part #EM58523 which will work great.

Hey Randy, We offer the following backing plate kits for different lengths of e-track: Single #e89RR 2-pk #e96RR 3-pk #e46RR 4-pk #e66RR 16-pk #e76YR

The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…