1. Home
2. Trailer Parts
3. Car Ramps
4. 74 Inch Longx

Hey Dan, thanks for reaching out. So I do have a solution that I want to run by you, but sadly, we do not offer a class 1 cargo carrier that has a built-in ramp. We do have a class 1 cargo carrier though, the Curt 19x47 Curt Cargo Carrier #C18110.…

Thanks for reaching out, Chris. I was able to get the dimensions for the trailer ramp portion of the Race Ramps Combo Ramps #RR-80-10-2. The highest portion of the ramp is 8" tall and the notched area is 6" tall. I edited a picture for you…

I won't be able to confirm exactly what ramp you need as I have no sort of database to reference for this but we do have a wide selection of ramps to choose from such as the Gen-Y Hitch Aluminum Loading Ramp Set part #GY52YR. These ramps measure…

Hey Nick, since the 7-way blade is a lot more popular than the 7-way round I would definitely recommend going with a 7-way flat. For that we have the part #e99011 which comes with a junction box to make installing on your trailer as easy as possible.…

Hey Phil, We offer loading ramps like the Gen-Y Hitch Aluminum Loading Ramp Set #GY55NR, but I'm assuming you're wanting the heavier duty ramps that fold back up and stay on the trailer, right? If so you'll want to look to a trailer…

Yes. You will be able to use the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs #325-GH-R84 with your 1-3/4" lip. Since the gap between the hook and the ramp is 2 inches, you have enough room. I went ahead and…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hello Tom. The Hellwig EZ-1000 Helper Springs - Above Axle #HE88VR would be an excellent fit for your 1986 Ford Ranger. The dimensions of these springs are: ¼" thick 2 ¼" wide 2 spring is 18 ½" long 2 springs is 14…

...inch in height and the car has a wheelbase of 74, and clearance of 5, weight of 2500lbs. I would like to have the ramps fold in half for easy storage. Or could someone recommend a set that would fit my...

The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator in your truck bed…

I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as it could cause the ramp to not be secure and will be a pretty…

Hello Pat, thanks for getting in touch. We deal in all sorts of cords and plugs for trailers, so we most likely will have what you are looking for. Can you tell me exactly what you are needing this cord for? What kind of plug is on your truck…