Filter by Type of Jack
$49.82 - $111.57
$49.82 - $548.22
$81.80 - $962.41
$49.82 - $148.69
Videos
for Camper Jacks
Help Articles
for Camper Jacks
Expert Answers
for Camper Jacks
We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…
view full answer...There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…
view full answer...The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…
view full answer...The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…
view full answer...The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…
view full answer...There are a couple of options to lift your 2024 Keystone Cougar 29rks depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and…
view full answer...Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…
view full answer...Hey Stephen, on the front sticker of the jack leg there should be a part number listed on it as well as the brand name Power Gear. Other ways to identify it is using measurements from the jack. For example the part #LC82TF has a bore diameter of 3…
view full answer...Hey Josh, the dimension for both jacks that you are looking for is the bracket height. This is the distance from the center of the jack's mounting bracket down to the ground when extended/retracted. On the shorter part #e34RV the bracket height…
view full answer...Hey Karl, for your 2023 Brinkley Z2900 I recommend going with the Adco Olefin HD RV Cover for 5th Wheel Toy Haulers up to 34' Long #AD49ZR. This cover will fit 5th wheels that are up to 34' long, 9' wide, and 10'6" tall so it…
view full answer...The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…
view full answer...Videos
for Camper Jacks
Help Articles
for Camper Jacks
Expert Answers
for Camper Jacks
We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…
view full answer...There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…
view full answer...The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…
view full answer...The gearbox #RVLG-RDBOX for the Landing Gear Set w/ Handle #RVLG-8HDL can be mounted in the horizontal or vertical position. I went out to the warehouse and tested both the gearbox and lead leg together and the pins that hold the gearbox in place…
view full answer...The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…
view full answer...There are a couple of options to lift your 2024 Keystone Cougar 29rks depending on if your axle's sit above or below the leaf springs. If your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and…
view full answer...Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…
view full answer...Hey Stephen, on the front sticker of the jack leg there should be a part number listed on it as well as the brand name Power Gear. Other ways to identify it is using measurements from the jack. For example the part #LC82TF has a bore diameter of 3…
view full answer...Hey Josh, the dimension for both jacks that you are looking for is the bracket height. This is the distance from the center of the jack's mounting bracket down to the ground when extended/retracted. On the shorter part #e34RV the bracket height…
view full answer...Hey Karl, for your 2023 Brinkley Z2900 I recommend going with the Adco Olefin HD RV Cover for 5th Wheel Toy Haulers up to 34' Long #AD49ZR. This cover will fit 5th wheels that are up to 34' long, 9' wide, and 10'6" tall so it…
view full answer...The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…
view full answer...Filters
40 results
Filter Results
$49.82 - $111.57
$49.82 - $548.22
$81.80 - $962.41
$49.82 - $148.69