1. Home
2. Towing
3. Bumper Hitch
4. CURTx

Normally a bumper is rated at about 3500 lbs towing capacity. It is usually stamped somewhere on the bumper or possibly on a sticker. A frame mounted hitch is going to have more capacity for towing due to how it is installed. Also, most trailers will…

...the measurement was 18-1/2" from the ground. This will end up being around 16" for the ground clearance at the receiver tube collar. Both the Curt Trailer Hitch Receiver # C13176 and etrailer Trailer Hitch...

...of the Curt Reducer Sleeve part # C45405. I have attached a few review videos for you to check out as well....

...included with this kit for further detail. When using this trailer hitch for non-towing application, you will need to use our Curt Trailer Hitch Support Strap part # 18050. You may also want to consider...

...the Curt # C38DR instead....

The DeeZee Specialty Seres Tongue Toolbox measures 36 inches(back) x 18 inches(front) x 19-1/2 inches wide x 17-3/4 inches tall, and has a lockable hasp. This is designed to be able to sit on a trailer tongue and has the hardware included. From my…

Great question Tarik, so to install a hitch pin when using the EcoHitch part #306-X7257 you will need to reach under the bumper like you can see at the 1:30 mark of the attached video. It shouldn't limit the bike racks you can use though.

I have a solution for you that is a little higher capacity than the #AM10501 that you asked about. You could use the ST235/85-16 tires in a load range G such as #TTWPRG235R16 which is rated for 4,400 pounds at 110 psi. Four of these would have an…

...Is there any difference between the curt and etrailer hitch for my 2020 chevy colorado? trying to decide between the two...

Yes, we do have a roof rack that will work with the rounded roof on your Interstate cargo trailer. It is the Rack'Em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This roof rack has a 400 lbs capacity and mounts to the side of your trailer…

The best option is the Rack'em Fitz-All Enclosed Ladder Rack, part #RA-28. This rack installs to the top of your trailer's side walls and telescopes to fit up to an 8-1/2 foot trailer with its telescoping design. The kit is capable of holding…

We carry rims with a 4.75 pilot hole, like #LHHA420, and #AM20783, however they're both for dual wheel applications and have an offset. Using a wheel with a 4.75 or 4.77 pilot will be just fine since there's such a small difference. It's…