1. Home
2. Trailer Parts
3. Brake Actuator
4. Surge Brake Actuatorx
5. Drum Brakesx

...coupler but you can use a different brand. The only thing I was able to find online about the 85778 is that it has a 2" coupler, is rated for 6,000 lbs and that it was used for either drum or disc brake...

...actuator, I recommend looking at the Carlisle HydraStar units. If your trailer has drum brakes, you will want part # HBA-10. If your trailer has disc brakes, then you will want part # HBA16. I have also...

...actuator. Unfortunately, we do no offer a bolt-on brake actuator for drum brakes with a manual lockout that will work for you therefore in order to retain a reverse lockout feature you will need to add...

...I was given a boat and trailer and the trailer is a dual axel and the drum brakes were locked up. I took the 82543 part off and the master brake cylinder off. It was filled with soot and It got hard...

...tongue rating Note: Atwood model 82543 has been discontinued including the master cylinder, so it can no longer be serviced. Current Brakes: Drum, 10” x 2 14” wide Hub/Drum Seals: 2.33” OD, 1.68” ID...

Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for…

The Dexter DX7.5L A-60 Actuator #DX56FR you have is designed to be mounted on the end of the trailer frame as seen in the image below. Based on how your actuator was mounted the Actuator #DX89FR would best install like your current actuator. If you…

...and drums, you may need to replace those as well. If you have 12 inch hub and drums, you can re-use them so long as they are in good shape. You will install your new electric brake assemblies, like part...

For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

The replacement Titan actuator for your Model 10 with part number 3241639 is listed on our site as the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout #T4750620. My contact at Titan confirmed this.

Hey Alex, So it sounds like you just want to replace your Ausco electric over hydraulic actuator with one that is compatible with your Chevy's brake controller, and you can definitely do that no problem. Since you have a boat trailer I'm…

...coupler but you can use a different brand. The only thing I was able to find online about the 85778 is that it has a 2" coupler, is rated for 6,000 lbs and that it was used for either drum or disc brake...

...actuator, I recommend looking at the Carlisle HydraStar units. If your trailer has drum brakes, you will want part # HBA-10. If your trailer has disc brakes, then you will want part # HBA16. I have also...

...actuator. Unfortunately, we do no offer a bolt-on brake actuator for drum brakes with a manual lockout that will work for you therefore in order to retain a reverse lockout feature you will need to add...

...I was given a boat and trailer and the trailer is a dual axel and the drum brakes were locked up. I took the 82543 part off and the master brake cylinder off. It was filled with soot and It got hard...

...tongue rating Note: Atwood model 82543 has been discontinued including the master cylinder, so it can no longer be serviced. Current Brakes: Drum, 10” x 2 14” wide Hub/Drum Seals: 2.33” OD, 1.68” ID...

Hello Darren. Thanks for reaching out, I can definitely help with this. To convert your 2024 Brinkley Z2900 5th wheel over to disc brakes, you will need a disc brake kit, a brake line kit, and electric over hydraulic actuator, and a breakaway kit for…

The Dexter DX7.5L A-60 Actuator #DX56FR you have is designed to be mounted on the end of the trailer frame as seen in the image below. Based on how your actuator was mounted the Actuator #DX89FR would best install like your current actuator. If you…

...and drums, you may need to replace those as well. If you have 12 inch hub and drums, you can re-use them so long as they are in good shape. You will install your new electric brake assemblies, like part...

For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

The replacement Titan actuator for your Model 10 with part number 3241639 is listed on our site as the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout #T4750620. My contact at Titan confirmed this.

Hey Alex, So it sounds like you just want to replace your Ausco electric over hydraulic actuator with one that is compatible with your Chevy's brake controller, and you can definitely do that no problem. Since you have a boat trailer I'm…