1. Home
2. Marine
3. Boat Lights
4. Accent Lightsx
5. Walkwayx

More of a strip than a bar but definitely not one of the strand type LED lights like item #DIA86QR! The Premium Slim LED Strip Light item #TN38ZR measures 60" long x 1/2" wide x 1/4" thick. It's ridigid and will hold it's…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

The Kwikee Electric RV Step Complete Assembly #LC372261 is the correct replacement steps for your LCI 128980 steps which are no longer available.

For your upgrade in trailer suspension on your triple axle Weekend Warrior toy hauler I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This kit comes with all the equalizers and hardware you need. Then you…

The Dexter E-Z Flex Suspension Kit part #K71-656-00 is designed for a triple axle trailer with 33" axle spread which is the distance between the axles on center. I don't have a way to look up the axle spread for any one trailer but so long…

For a triple axle trailer with 6k rated axles the correct Dexter EZ Flex is the part #K71-656-00. The #K71-657-00 would be for 8k axles. I attached an install video for this kit for you to check out as well.

The cushioned equalizers included with the #K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and…

The Dexter EZ Flex kit part #K71-657-00 that you referenced is a triple axle equalizer kit that comes with cushioned equalizers that are 7-3/4 inches wide from bolt hole center to bolt hole center. You may have ordered the #K71-656-00 instead as it…

The "Trailer Disconnected" error message on the dash with a factory brake controller is usually related to an issue with the blue brake output wire that runs from the brake controller to the 7-Way connector. The fact that the issue remains…

For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.

The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt DC this light is compatible.

Yes it will, Tom. The control module 289252 you have on your Lippert 4-point system has been discontinued and replaced with the Replacement Lippert Leveling Control Brain for 4-Point Leveling System #LC53ED. If you also need a new wiring harness, you…

More of a strip than a bar but definitely not one of the strand type LED lights like item #DIA86QR! The Premium Slim LED Strip Light item #TN38ZR measures 60" long x 1/2" wide x 1/4" thick. It's ridigid and will hold it's…

Hey Tanya, thanks for reaching out! To tow your trailer you'll need a ball mount with a 2" rise and for that I recommend going with the etrailer Ball Mount Kit #e38NR. This gives you a 2-3/4" rise but that will still work for your…

The Kwikee Electric RV Step Complete Assembly #LC372261 is the correct replacement steps for your LCI 128980 steps which are no longer available.

For your upgrade in trailer suspension on your triple axle Weekend Warrior toy hauler I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This kit comes with all the equalizers and hardware you need. Then you…

The Dexter E-Z Flex Suspension Kit part #K71-656-00 is designed for a triple axle trailer with 33" axle spread which is the distance between the axles on center. I don't have a way to look up the axle spread for any one trailer but so long…

For a triple axle trailer with 6k rated axles the correct Dexter EZ Flex is the part #K71-656-00. The #K71-657-00 would be for 8k axles. I attached an install video for this kit for you to check out as well.

The cushioned equalizers included with the #K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and…

The Dexter EZ Flex kit part #K71-657-00 that you referenced is a triple axle equalizer kit that comes with cushioned equalizers that are 7-3/4 inches wide from bolt hole center to bolt hole center. You may have ordered the #K71-656-00 instead as it…

The "Trailer Disconnected" error message on the dash with a factory brake controller is usually related to an issue with the blue brake output wire that runs from the brake controller to the 7-Way connector. The fact that the issue remains…

For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.

The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24, or 36 volt DC this light is compatible.

Yes it will, Tom. The control module 289252 you have on your Lippert 4-point system has been discontinued and replaced with the Replacement Lippert Leveling Control Brain for 4-Point Leveling System #LC53ED. If you also need a new wiring harness, you…