1. Home
2. Marine
3. Boat Lights
4. Deckx

I do have an option for you but the Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal is not offered with a red lens, only amber part #MCL48AB and clear part #MCL48CAB. For a similar clearance light has turn signal capabilities I…

Yes, they have different widths. Each of the Flex guards you mentioned item #LC1346271, item #LC1346281, and item #LC1346291 are 50-1/2" long. However, the width of the single is 6", the double is 12", and the triple is 18".

Yes you can, Stan. You can both daisy chain the Peterson Great White LED Trailer Interior Cove Light #359-2, and screw them into the metal ribs on your trailer. You can then wire the lights to a simple on/off switch like the Single Rocker Switch…

Hey Michael, Sorry for the wait, I've reached out to TecNiq to see if they have a salt spray rating for the LED Boat Docking Lights #TN83ZR and still haven't heard back from them (most likely because of the holidays). I did see on their site…

More of a strip than a bar but definitely not one of the strand type LED lights like item #DIA86QR! The Premium Slim LED Strip Light item #TN38ZR measures 60" long x 1/2" wide x 1/4" thick. It's ridigid and will hold it's…

The hole for the LED Boat Docking Lights - Recessed Mount - Waterproof - 12V/24V - Qty 2 #TN83ZR is an oval shape. The hole is 4.25" x 2.3" and you will be able to use the gasket as a template to cut the hull. I have attached a dimensional…

The tilt angle is 120 degrees of the LED Boat Docking Lights #TN83ZR.

The Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #TA65VR and the Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #AM20761B you referenced do not have individual…

The Opti-Brite LED Dome Light for Refrigerated Trucks and Trailers #OPT38FR will work fine but it may be quite bright at 1,200 Lumens. Instead, I recommend the Opti-Brite LED RV Dome Light #ILL10CCB, which feature the same dimensions, but only put…

The first thing you need to do is look for any axle tag or etched axle number on the crosstube itself. Sometimes this information is inside the axle hubs if the axles came as a complete assembly. The axle information can also be found on any…

Hello Eric. For the SeeLeveL Sensor for RV Holding Tank Monitor #SE78VR, the blue wire is for the tank sender signal and the black is for ground. As long as they are wired correctly, they will work with any monitor including your ESP8266.

The cushioned equalizers included with the #K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and…

I do have an option for you but the Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal is not offered with a red lens, only amber part #MCL48AB and clear part #MCL48CAB. For a similar clearance light has turn signal capabilities I…

Yes, they have different widths. Each of the Flex guards you mentioned item #LC1346271, item #LC1346281, and item #LC1346291 are 50-1/2" long. However, the width of the single is 6", the double is 12", and the triple is 18".

Yes you can, Stan. You can both daisy chain the Peterson Great White LED Trailer Interior Cove Light #359-2, and screw them into the metal ribs on your trailer. You can then wire the lights to a simple on/off switch like the Single Rocker Switch…

Hey Michael, Sorry for the wait, I've reached out to TecNiq to see if they have a salt spray rating for the LED Boat Docking Lights #TN83ZR and still haven't heard back from them (most likely because of the holidays). I did see on their site…

More of a strip than a bar but definitely not one of the strand type LED lights like item #DIA86QR! The Premium Slim LED Strip Light item #TN38ZR measures 60" long x 1/2" wide x 1/4" thick. It's ridigid and will hold it's…

The hole for the LED Boat Docking Lights - Recessed Mount - Waterproof - 12V/24V - Qty 2 #TN83ZR is an oval shape. The hole is 4.25" x 2.3" and you will be able to use the gasket as a template to cut the hull. I have attached a dimensional…

The tilt angle is 120 degrees of the LED Boat Docking Lights #TN83ZR.

The Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #TA65VR and the Dexstar Steel Mini Mod Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black item #AM20761B you referenced do not have individual…

The Opti-Brite LED Dome Light for Refrigerated Trucks and Trailers #OPT38FR will work fine but it may be quite bright at 1,200 Lumens. Instead, I recommend the Opti-Brite LED RV Dome Light #ILL10CCB, which feature the same dimensions, but only put…

The first thing you need to do is look for any axle tag or etched axle number on the crosstube itself. Sometimes this information is inside the axle hubs if the axles came as a complete assembly. The axle information can also be found on any…

Hello Eric. For the SeeLeveL Sensor for RV Holding Tank Monitor #SE78VR, the blue wire is for the tank sender signal and the black is for ground. As long as they are wired correctly, they will work with any monitor including your ESP8266.

The cushioned equalizers included with the #K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and…