Videos
for Boat Flags
Help Articles
for Boat Flags
Expert Answers
for Boat Flags
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…
view full answer...The difference between a load range E and load range F tire of the same size, 235/85-16, is the weight capacity and pressure. The Karrier Radial Tire, Load Range E, #AM10295, has a capacity of 3,640 pounds at 95 psi. The Load Range F Tire,…
view full answer...Per the manufacturer, Excel, the Excel RV Tankless On-Demand Water Heater - Gas - Electric Ignition - Ventless - 38,000 Btu #EX93FR has to be installed upright with the vent facing upwards. Other than that the only other installation restriction is…
view full answer...There are a few things that you will need to know in order to choose the right disc brake kit for your 2003 DHM boat trailer. I assume you have idler hubs and are replacing your brakes so you already have a 4-bolt brake mounting flange #4-35 as…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel…
view full answer...The overall height of the UWS Truck Bed Chest #UWS01047 is 17-1/4 inches which is going to be shorter than the height of your truck bedrails so it will pretty easily fit underneath your tonneau cover. Now without knowing the length of your bed and…
view full answer...We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory…
view full answer...Other than potentially pinching or damaging the wiring on your Ground Control 3.0 System #LC358590, I don't see any reason why you can't do this; it's really no different than taking the jack off and…
view full answer...To install the Replacement I-Beam Jack Bracket #LC349975 for Lippert Ground Control 3.0 #LC358590 you'll need to follow the instructions that came with the Lippert Ground Control 3.0. I've attached a cutout from the…
view full answer...I have attached for you below the complete dimensions of the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 part #LC349975 to the degree that Lippert was willing to share. If you require further dimensions, I'd need…
view full answer...I wasn't able to find any specs on the Magic Chef CLY222OBDB you mentioned, but the Furrion 2-in-1 Range Oven #FR97KR is a great replacement oven as long as the cutout you're putting it in is 21-1/2"…
view full answer...