Filter by Coupler Size Compatibility
$71.93 - $167.68
Videos
for Adjustable Trailer Coupler
Help Articles
for Adjustable Trailer Coupler
Expert Answers
for Adjustable Trailer Coupler
First I want to make sure you verify your channel mount for the Demco Trailer Coupler #DM14040-81 has a 21K or larger capacity as often times they are less like the Demco #DM15349-52 which often times people look at and think it is a channel mount…
view full answer...According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
view full answer...Hey Kolin, that part number BC21014 is actually the part number for a Demco coupler decal and not for an actual ball mount. If what you have looks just like the part #DM15945 I would say it's a pretty safe choice for a replacement. Otherwise if…
view full answer...Hello Cody, I was able to get the instructions online for the Rough Country Air Bags, I do not see how they will work together. I have attached a picture where I highlighted in a nice etrailer yellow where the Country Air Bag is installed where the…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...The overall width of channel mount coupler #CTA-280 where it attaches to a channel is slightly less than 3 inches to fit a 3 inch bracket such as #CTA-CB126 which has an inside width of 3 inches. I have linked videos of both of these parts for you.…
view full answer...First you will need to remove the old hydraulic equipment. Remove the surge coupler or actuator, remove all the lines, and finally remove the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well. If you…
view full answer...Yes, you can so long as your Demco EZ latch coupler is cast like item #DM14040-81 or item #DM37ZR. The InfiniteRule Lock for Demco eZ-Latch Trailer Couplers item #IR66FR works great with these couplers whether they're being towed or parked.
view full answer...What you noticed is correct. The only difference between these two couplers is the color. The #DM15791-52 is silver and the #DM15791-81 is black. Even with a different color finish they both offer the same 500-hour salt spray rating.
view full answer...Hey Mike! The Blue Ox Base Plate Kit item #BX2170, that fits your 4WD 1999 Ranger, is compatible with other brands of tow bars if you use an adapter. I have listed which ones you'll need below: Roadmaster - BlackHawk 2 All-Terrain, Nighthawk, and…
view full answer...Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…
view full answer...The Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K #DM14040-81 has an integrated 5/16 inch pin hole with a 3 inch span for that lockable feature. I recommend using the Trailer Coupler Lock #e98888…
view full answer...Filter Products