Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.

Moves your trailer's leaf springs to the top of your axle. Works with 3" diameter axles and double-eye leaf springs only.

Increase the lateral strength of your fifth wheel or travel trailer suspension with this steel crossmember. The crossmember easily adjusts to fit the width of your trailer's frame.

Increase the lateral strength of your fifth wheel or travel trailer suspension with this steel crossmember. The crossmember easily adjusts to fit the width of your trailer's frame.

Replaces the Correct Track axle hanger that was welded to the frame of your vehicle by the manufacturer.

Replaces 1 rubber equalizer for E-Z Flex heavy-duty rubber suspension system by Dexter Axle (K71-652-00).

Increase the lateral strength of your fifth wheel or travel trailer suspension with this steel crossmember. The crossmember easily adjusts to fit the width of your trailer's frame.

Replaces 1 air bag for your Lippert Center Point by Trailair air ride suspension upgrade system (LC1565391 or LC1565401).

Replaces 1 of the gas-powered shock absorbers in your Roadmaster Comfort Ride trailer suspension system.

Heavy-duty hanger can be configured to work as either a front or rear hanger in your trailer's double-eye leaf spring suspension setup. Designed to bolt onto your trailer frame.

Replaces (1) 9/16" x 3-1/4" wet shoulder bolt for your Lippert Components Equa-Flex tandem axle suspension kit.

1-3/4" Long cotter pin locks a castle nut (sold separately) in place.

Replaces a flange nut for your Dexter Axle trailer suspension kit. Works with EZ-Flex, heavy-duty, suspension, and tandem axle attaching parts kits.

Heavy-duty hanger can be configured to work as either a front, center, or rear hanger in your trailer's double-eye leaf spring suspension setup. Galvanized steel construction is great for marine use. Designed to bolt onto your trailer frame.

2-7/8" Long, Grade 5 suspension bolt secures your equalizer to the hanger.

Replaces the spring seat needed for your Dexter trailer springs over-under conversion kit (K71-384-00).

3/4" Diameter locknut is designed for use with a shackle bolt (7-135-2 - sold separately).

Replaces (1) 7/16"-20 flange nut. Can be used in combination with 7/16" U-bolts to mount 3" axle tubes to a trailer's spring suspension system.

9/16" Diameter locknut is designed for use with shackle bolt (sold separately).