Accessories and Parts   >    RV Water Heaters   x   >  

Replaces the control board in your older gas only water heater (AT94191, AT96121, and AT96136). Sends power through 4-wire control harness (AT93313 - sold separately) to the other points in the heater.

Replaces the gas control valve and thermostat for your Atwood RV gas water heater (AT94180, AT94191, AT96110, AT96121, or AT96136) or gas and electric water heater (AT94022, AT94023, AT94186, AT96117, AT96161SU, or AT96163).

Replaces the control harness in your older Atwood electric/gas combination or gas water heater (AT94191, AT96121, and AT96136). Connects to the control board (AT91367 - sold separately) to supply power from the board to other points in the heater.

This kit converts your RV's 6-gallon hot water heater from propane to electric operation, while keeping the LP system intact. Adjustable thermostat controls water temperature. Hardware included.

This kit converts your RV's 10-gallon hot water heater from propane to electric operation, while keeping the LP system intact. Adjustable thermostat controls water temperature. Hardware included.

Replaces the door that came with your 6-gallon Atwood water heater. Protects the inner components of your water heater.

When winterizing your RV, don't waste antifreeze by letting it fill up your RV's water heater tank. Instead, use this permanent bypass kit to keep the antifreeze in your RV's water lines. Valves allow fast, easy activation every winter.

Replaces the on/off switch that came with your Atwood water heater. Operates either the gas burner or the electric heating element in your water heater. Mounts to the wall in your coach for easy access.

Replaces the double-panel on/off switch that came with your Dometic water heater. Operates both the gas burner and the electric heating element in your water heater. Mounts to the wall in your coach for easy access.

This kit retrofits your Hott Rod water heater conversion system (sold separately) to include an on/off switch. Backlit switch is visible in low-light conditions. Includes color-coded wiring harness and mounting hardware.

This on/off switch operates either the gas burner or the electric heating element in your Atwood water heater. Mounts to the wall in your coach for easy access.

This aluminum anode rod attracts corrosive elements in your RV's water heater, protecting your tank from corrosion. The 3/4" diameter x 9-1/2" long rod fits Suburban (Mor-Flo) heaters.

When winterizing your RV, don't waste antifreeze by letting it fill up your RV's water heater tank. Instead, use this permanent bypass kit to keep the antifreeze in your RV's water lines. Valves allow fast, easy activation every winter.

Replaces the heating element for your 10-gallon Hott Rod water heater (DGR10VP - sold separately). Electrically heats the water in your tank. Protective coating prevents rust and corrosion.

Exchange the worn out element for your RV's electric water heater with Camco's 100 Watt, 120 Volt replacement part. Also compatible with most residential-grade water heaters.

Replaces the door that came with your Atwood 6-gallon water heater with this black door assembly.

When winterizing your RV, don't waste antifreeze by letting it fill up your water heater tank. Instead, use this bypass kit and keep the antifreeze in your RV's water lines. Set up this seasonal kit in the fall and remove it in the spring.

This access door protects the inner components of your On Demand 6-gallon water heater. Lets you install heater in RV cabinet or below the floor for extra space. Top plate and mounting flanges add length and width to the door for larger openings.

This converter helps you conserve propane in your RV by heating your 6-gallon water heater with 120-volt electricity instead. Includes an on/off switch, mounting bracket, thermostat, power cords, and wire assemblies.

This access door protects the inner components of your 6-gallon, Atwood water heater. Lets you install heater in RV cabinet or below the floor for extra space.

This wrench lets you remove and replace screw-in water heater elements with ease. The zinc-plated wrench works with your screwdriver to reach where other wrenches can't. Fits all 5" regular screw-in elements and 1-1/2" nuts.

Replace broken water heater door latch assemblies or gas bottle cover access door latches with these steel cam locks. 2 Cam locks included.