Replaces (1) 63" long arm assembly used to support your Carefree, Dometic, or Solera RV awning.

Replaces the control box and nested touchpad on your Solera Smart Arm RV awning.

Replaces 1 pitch arm assembly used to support your Solera XL flat RV awning with 63" long support arms.

Replaces the front cover of the Regal-style idler head on your Solera 12V, 18V, or Smart Arm electric RV awning.

This awning rail lets you anchor your awning fabric to your RV. The rail is 8' long and mounts on the outside wall of your RV.

Replace the support arms on your RV awning with these electric arms for easy, push-of-a-button operation. Conversion kit wires into your RV's power to work with your existing setup. Pitch can be manually adjusted to block sun all day.

Replaces the front cover of the Regal-style drive head on your Solera 12V, 18V, or Smart Arm electric RV awning.

Replaces the plain-style drive head of your Solera 12V, 18V, or Smart Arm electric awning.

Replaces the gear pack in the drive head motor of your Solera 12V, 18V, or Smart Arm electric RV awning.

Replace the support arms on your RV awning with these electric arms for easy, push-of-a-button operation. Conversion kit wires into your RV's power to work with your existing setup. Pitch can be manually adjusted to block sun all day.

Replaces the Regal-style idler head of your Solera 12V, 18V, or Smart Arm electric awning.

Replace the head and roll bar on the left side of your Solera slide-topper awning.

This awning rail lets you anchor your awning fabric to your RV. The rail is 8' long and mounts on the outside wall of your RV.

Add this wind sensor to your Solera Smart Arm to prevent damage to your awning. Sensor automatically retracts your awning when high winds are detected. Offers 3 levels of sensitivity. Installation hardware and wiring harness included.

Replaces the front cover of the drive head on your Lippert Edge RV awning.

Replaces 1 retaining washer needed for the pitch arm assembly on your Solera RV awning.

Replaces the head pin of the Regal-style drive head on your Solera 12V, 18V, or Smart Arm electric RV awning.

Replaces 1 roller tube endcap on your Solera electric RV awning.

Replaces the motor of your Solera 12V, 18V, or Smart Arm electric RV awning manufactured after 2015.

Replaces the flat track LED light strip for your Solera RV awning. Requires switch found in Solera LED fabric light kits (LC674282 and LC674283).

Replaces the head pin of the plain-style drive head on your Solera 12V electric RV awning.

Replace the head and roll bar on the right side of your Solera slide-topper awning.

Replaces the front cover of the idler head on your Lippert Edge RV awning.

Replace the support arms of your manual pull-style RV awning. Easily detach arms and swing into carport position, and adjust pitch to keep your RV patio in the shade all day.