Replaces the printed circuit board for your MaxxFan RV roof vent with powered lift and reversible fan. Works with both aftermarket and OEM models of MaxxFan Plus and MaxxFan Deluxe manufactured after 2010.

Replaces the bow-tie bracket, motor, and blade for your Fan-Tastic Vent roof vent fan (FV800800, FV801200, FV801250, FV802250, FV803350, or FV807350).

Roof vent install kit allows you to properly mount your RV roof vent and create a waterproof seal. Kit includes 2 tubes of self-leveling sealant, 1 roll of butyl tape, 8 wood screws, and 30 sheet metal screws.

Replaces the printed circuit board and switch for your MaxxFan roof vents (MA00A04301K).

Use this 7-rpm auto-lift motor to replace the damaged one in a Fan-Tastic Vent B Series roof vent with a powered lift arm.

Replaces the seal on your Ventline Ventadome RV roof vent. Keeps water from entering between the dome and the base when the vent is closed. Works with Ventline vents manufactured after 2008 or older vents with rounded domes.

Replaces the 12-volt DC variable-speed fan motor on your MaxxAir MaxxFan RV roof vent (MA00-04000K, MA00A04301K, MA00A04401K, MA00-04500K, MA00-05100K, MA00-05301K, MA00-06200K, MA00-06401K, MA00-07000K, or MA00-07500K).

Replaces the lift arm for your Fan-Tastic Vent roof vent.

Replaces a 110V fan motor for Ventline bathroom insert fans for motor homes and enclosed trailers with 100 CFM capacity (V2262-100 and V2244-100).

Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan.

Replaces the lift motor needed to open your MaxxFan Plus roof vent.

Replaces the manual lift operator for your MaxxAir roof vents with manual lid operation.

Replaces a broken screen frame and screen on your Ventline Ventadome RV manual lift roof vent for motor homes and enclosed trailers. Held securely in place by the frame, the screen keeps out debris and insects when the vent is open.

Replaces the screen frame and screen on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. Frame with removable screen, rocker switch, and wire replaces older-style 1-piece screen frame with push button fan motor switch.

Upgrades your Fan-Tastic Vent 730 Series roof vent for extra functionality. Works on high and low style bases.

Garnish creates an attractive inside appearance for Fan-Tastic Vent roof vents. Fits a range of sizes depending on the roof thickness and Fan-Tastic Vents vent model.

This 93-1/2" long uneven rub rail covers and protects unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your application.

Roof vent install kit allows you to properly mount your RV roof vent and create a waterproof seal. Kit includes 2 tubes of self-leveling sealant, 1 roll of butyl tape, 8 wood screws, and 30 sheet metal screws.

This 93-1/2" long even rub rail covers and protects unfinished edges along the bottom of your enclosed trailer or around your trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your application.

These brackets work with Pack'em towers (sold separately) to create a ladder rack for the side of your trailer. Brackets can also be added to rack so you can carry a second ladder. Includes 2 brackets and 4 bungee cords.

Custom fit, plastic interior trim piece creates an attractive inside appearance for Ventline Ventadome roof vents. Fits a range of sizes - from 4-7/8" to 6-1/4" - depending on roof thickness and Ventline vent model.

Custom fit, plastic interior trim piece creates an attractive inside appearance for Ventline Ventadome roof vents. Fits a range of sizes - from 2-7/8" to 4-1/4" - depending on roof thickness and Ventline vent model.

Replaces the manual lift knob for your Fan-Tastic Vent clamp-on roof vent. Works with models 4000, 5000RBT, and 8000.

This 93-1/2" long section of rounded J-channel trim covers unfinished or sharp edges around your enclosed trailer's stone guard. Aluminum construction is sturdy and rustproof. Trim can be cut to fit your specific application.