Use your Gen 6 or later Hydrastar electric-over-hydraulic brake actuator with your factory Ford (model years 2007 - 2008) or Chevy (model years 2007 - current) electric trailer brake controller by installing this adapter.

This replacement assembly fits Dexter Model 10 and Model 20 trailer brake actuators for drum brakes.

This flexible, rubber line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Includes 3/16" FIF and 90-degree male fittings.

This plug and play pump replaces the electric-over-hydraulic brake actuator and SD control module for your Dexter BrakeRite II SD (K68-002-00). The 3 plugs allow you to connect your battery cable, breakaway switch, and harness directly to the pump.

Replaces the master cylinder assembly for your Dexter Model 10 or Model 20 brake actuator. Works for disc brake applications only. For drum brake applications use T2374600 instead.

This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent leaks, splits, and corrosion. Includes 2 standard male flare nut fittings.

This replacement inner member slide fits into existing outer member housings of your Dexter DX7.5L and Legacy UFP surge brake actuator. For use with tandem-axle trailers with hydraulic disc brakes.

Thick, durable brake line kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 25', 6', and 4-1/4' brake lines, 3/16" flex lines, plus fittings and hardware.

This replacement assembly fits Dexter Model 60 and Aero 7500 trailer brake actuators for drum brakes. Includes master cylinder, filler cap, orifice fitting, and hardware.

This adapter module allows you to control your Dexter Axle BrakeRite (T4813100, T4813102, T482250, or T4835700) electric-over-hydraulic brake actuator with your factory Ford, GMC, or Chevy brake controller.

Replace the master cylinder on your Demco drum brake actuator. Fits all Demco drum brake actuators.

Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 20', (2) 7', 3-1/2', and (2) 1-1/2' flexible hoses, plus fittings and hardware.

Replace the master cylinder in your Dexter disc brake actuator. Includes master cylinder, filler cap, orifice fitting, solenoid valve, and hardware. Fits most Dexter disc brake actuators in the A Series and XR Series.

Replaces the shock on your Dexter Model 6 or Model 10 brake actuator. Includes 1 shock.

This replacement inner member slide fits into the existing outer member housing of your Dexter DX7.5L and Legacy UFP surge brake actuator. For use with single-axle trailers with hydraulic disc brakes.

Backup valve installs in trailer brake actuators with high psi ratings and wires into your tow vehicle so that the trailer brakes do not activate when you shift your tow vehicle into reverse.

Fitting and tubing kit is designed for use on tandem, torsion-axle applications.

This replacement assembly fits Dexter Model 6 brake actuators for drum brakes. Orifice connector (T1209800) is sold separately.

This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Includes 2 standard male flare nut fittings.

This flexible, rubber brake line acts as part of a trailer's hydraulic braking system. Stainless steel flares, brass fittings, and a high thread engagement help prevent splits, corrosion, and leaks. Straight and 90-degree male fittings included.

Replaces shock absorber for Dexter Model 60 brake actuators.

Includes the components needed to repair the break away cable on your Dexter Axle A-60 brake actuator. Works with all Dexter Axle A-60 brake actuators.

Brake line kit lets you run brake fluid from your surge brake actuator to your trailer brakes. Great for disc brakes and torsion axles. Includes 15', (2) 7', 3-1/2', and (2) 1-1/2' flexible hoses, plus fittings and hardware.

This hydraulic brake hose is 18-7/8" long and comes with 1/8" e-coated steel male and female fittings on either end. Connects the hydraulic brake steel line from the actuator to the lines that go to the trailer brakes.